Tin Foil Jelly Fish Craft

I love this super cute, jelly fish craft for so many reasons. Our TIN FOIL JELLY FISH were inspired by a trip to the Baltimore Aquarium and the girls’ fascination with “The Jelly Fish Invasion” exhibit. (Super cool…if you are anywhere near Baltimore, go see it!!!) I love that this craft costs nearly nothing to make and L learned all about textures and rubbings while coloring the foil. And I LOVE the way our jelly fish look hanging in our kitchen window. If you can, place them near an air vent…when the air kicks on the jelly fish will come to life, dancing and swimming in the sun!

 

 

 

 

“The Jelly Fish Invasion” at the Baltimore Aquarium…

Materials needed:

  • tin foil
  • permanent markers
  • egg cartons
  • other small, plastic containers (think applesauce, olives, etc.)
  • string or fishing line
  • painted stick
  • tape
  • scissors
  • paperclips
  • nail or sharp-tipped tool

First, cut your egg carton into little jelly fish shapes.

Next, take a few sheets of tin foil and have your children color them. This is a great opportunity to make rubbings. L colored on the patio furniture and bricks, over tree bark, on the textured sidewalk and on her slide. Not entirely necessary, but why not!? Your kids can also try making different patterns if coloring on a flat surface…stripes, dots, swirls, anything goes!

 

 

Cut the tin foil into little squares and have your kids wrap the egg carton cut outs with the foil. You may have to help them smooth down the outer edges.

 

 

 

 

If you have some small, plastic containers to use as well, first poke a hole in the center. Next, cover the containers with the foil too.

 

Cut strips of tin foil and tape the strips, 2 or 3 at a time, to the inside of your jelly fish.

 

 

Using a nail or sharp tool, poke a hole into the top of each jelly fish.

Now, it’s time to hang your jelly fish up. I knew ours would go in our kitchen window, so we hung the jelly fish along a painted stick. You could also make one large jelly fish and hang the smaller ones underneath. That method would be cute if hanging your jelly fish up under a light, in the center of a room.

We hung our jelly fish by stringing them onto fishing line and tying the line to a paperclip underneath each one. Some hung on their own, while others had a second jelly fish hanging underneath. Get creative and have fun with it!

 

When doing projects like this, it’s definitely easier to have the jelly fish hanging while you are tying them on rather than laying flat on the ground.

Put them up to display and enjoy!!!

 

Doorknob Mushroom-Fairy Houses

Aren’t these DOORKNOB MUSHROOM-FAIRY HOUSES the cutest??? I originally planned to just make mushrooms out of these little wooden knobs, but I just had to paint a little door and window on too. They’re just so sweet! L painted hers knobs into multi-colored mushrooms today and they are already out in the garden! So easy and so much fun!

 

Materials needed:

  • small wooden knobs w/ screws
  • acrylic paint
  • sealant spray
  • egg carton (optional)

First, twist the screw into the knobs.

Next, paint your knobs. You can paint them to look like mushrooms or add a few extra details for a fairy house. Even a 3 year old can paint the knob to look like a cute, lil mushroom!

 

 

 

After your knobs are painted, set them aside to dry. I suggest using an egg carton to prop the knobs up. Next, take them outside to spray with a coat of sealant. (The egg carton works great for this step too!)

Now for the fun part…tuck them away into your fairy garden, in a flower pot or in a wreath. Keep the screws in, just push them into the ground. Adorable! Might as well make a couple extra for family and friends!

 

 

 

If you like this one, you’ll be sure to like our JAM JAR FAIRY HOUSES and GNOME HOMES too!

Jam Jar Fairy House / Jam Jar Gnome Home

The other night I had a hard time falling asleep because I couldn’t stop brainstorming about how to turn a jar into a fairy house. (Only me…I know.) I knew I wanted to make it so at night the windows and door would light up; the house needed to be sturdy enough to stand up to the elements outdoors; and I wanted to use craft materials we already had around the house. Finally I had a eureka moment…why not use my beloved hot glue gun!?! So many people think hot glue guns are just for gluing things together, but they can add texture and dimension to your work as well. I’m super excited to share with you this simple tutorial for making JAM JAR FAIRY HOUSES & GNOME HOMES! They really are adorable!

 

Materials needed:

  • jars
  • hot glue gun and glue
  • acrylic paints
  • preserved moss, tree bark, or dried leaves
  • dried flowers
  • a bead or button
  • tea lights (battery operated)

 

First, decide which direction you’d like your jar to stand. For instance, my smallest JAM JAR FAIRY HOUSE stands on its lid, but the larger one (made from an apple sauce jar) stands upright. Using your hot glue gun, “draw” a door and windows on your house. Then, fill in the walls of the house with vertical lines of your hot glue. Try to draw them on in long, fluid strokes, but the house by no means needs to be perfect. Each lil blip or quirk, will give your fairy house more character!

 

Next, paint the inside of the jar where your windows and door are located. Keep in mind that you’ll want some light to shine through at night, so don’t pick colors too dark or layer the paint too thick.

 

After you’ve painted the inside, paint the outside of the jar brown. Carefully go around each window and the doorway.

 

After the paint dries, the final step is gluing on dried moss and some tiny dried flowers. For our little jam jar fairy house, I glued moss on the top of the house (bottom of the jar) and along the edges of the lid. You can find preserved moss at your local craft store or, if you like, just use natural materials found in your own backyard…twigs, tree bark, fallen leaves, helicopter seeds, acorns.

 

 

 

You can display your fairy houses inside or outside. To light them up at night, just place a little, battery operated, tea light inside. Enjoy!

 

 

If you’re giving a JAM JAR FAIRY HOUSE away as a gift, don’t forget to include some fairies and some fairy furniture tucked away inside the jar!

DIY Fairy Folk

DIY Flower Fairies

Fairy Furniture

DIY Fairy Wands

 

The Mud Kitchen

Our MUD KITCHEN might just be my favorite kids’ project yet! I’ve been dreaming of building one for L since late last Summer and this Spring we went for it! Collecting things and building it was definitely fun for me…I love scouring antique shops and junk stores with an idea in mind. And now L has a blast playing in her MUD KITCHEN nearly every day! She’s always loved digging in her dirt pit, so we set the mud kitchen up right beside it.

 

 

Materials needed:

  • old pots and pans, muffin pan, mixing bowls, old tea set
  • cooking utensils and/or garden tools
  • old rags
  • shelving unit
  • DIRT!!!

The best places to find things for your MUD KITCHEN are yard sales, flea markets, antique and junk stores. If you find a water-proof set of shelves or little bench, that would work great! We ended up making ours out of some lumber and cinder blocks. L helped sand and paint the wood, I painted two lil burners on the top pieces, and we finished it off with a few coats of polyurethane. I love that L was able to make it her own!

 

 

 

We found this perfect mirror to attach to the kitchen for only $15 at a local antique store. I wanted a mirror for a bit of a “kitchen window” effect, plus it makes our tiny yard look a bit bigger! It was the only one I could find that had a wooden backing to it…most others were particle board or cardboard. Our mud kitchen is up against our house, a little bit protected by the weather, but when it pours rain the kitchen still gets wet. Make sure everything on your kitchen is more-or-less waterproof.

Along with the burners I painted on top of the mud kitchen, we also attached two lil knobs (to turn the stove and oven on, of course)! You can find knobs really cheap at your local Habitat for Humanity or at your local hardware store. Since ours were attached to solid wood, I just glued them on with some superglue. So far it’s worked great!

On the side of our mud kitchen, we attached two cute lil hooks. Again, we found them at a local antique/junk store for $1. They couldn’t be more perfect! L hangs her lil dish rags on there and when she’s all done playing with her kitchen each day, I have her clean it up. She brushes the dirt off with a dry rag, follows up with a wet rag, and she puts all her pots and pans away.

 

Like many activities like this, my biggest tip to you would be to withhold some of the kitchen supplies, giving your kids a lil more day by day. On the first day I gave L her pot, pan, and mixing bowls. On the second day, we added an empty milk carton, egg carton and vanilla bottle. After that, we threw in a muffin pan and some old silicon muffin cups. I have an old child’s tea set I’m saving for a special day as well. Keep things interesting and mix it up!

 

Sparkle bottles would be a fun addition to your mud kitchen too! Not to mention, making some potions out there as well. (Tell me I’m not the only one who mixed up “magic potions” with water, dirt, wild onions and herbs as a kid!)

How much would your child LOVE a mud kitchen??? Mmm…mmm…mud pies, mud spaghetti, dirt scrambled eggs, mud muffins…

 

DIY Ant Farm

I’m so super excited to share this project with you. ANT FARMS are fun to make and fascinating to observe with your little ones! L and I have been staring at our jar all day, reading kids books on insects, watching some National Geographic clips on ants, and we’ve found some fun facts along the way. Within the first 24 hrs of placing your ants inside your DIY ANT FARM, they will dig tunnels and make chambers right before your eyes!

The ants you collect will most likely be “worker ants” and all worker ants are female…pretty amazing! Most ant colonies contain one queen ant who lays all the eggs, male ants whose only job is to make babies with the queen, and worker ants who gather food, dig tunnels, and protect the colony. When collecting ants you want to be sure to only collect ants from one colony, otherwise the ants will fight to their death inside your jar.

Materials needed:

  • large jar (pickle jar)
  • small jar (jam jar or spice jar)
  • loose, sandy soil (Cactus/Citrus Soil works great!)
  • spoon
  • small jar or cup
  • jam or sugar water

To make your ant farm, place the small jar upside down, inside the larger jar.

Next, carefully spoon the soil into the jar. L would place a spoonful on the top of the little jar and then brush the soil down along the sides. It does not have to be packed tightly, just filled to the top.

 

 

To collect ants, put about one tsp. of sugar water or jam into a separate jar or cup and place it outside on its side. This is your ant trap. You may want to set a few ant traps around your garden and be patient. It can take a few days for the ants to discover your bait, but once they do many will follow!

After your ant farm is made and the ants have been caught, quickly and carefully dump your ants inside your ant farm and screw on the cap. You’ll want about 10-20 ants. I think we have about 5 ants in our jar…it takes a couple minutes to find them, but works just fine! They are busy digging all those tunnels and chambers all by themselves!

 

Once a week, open the lid to your jar and place a few drops of sugar water and/or a couple pieces of bird seed. You don’t want to feed them too much, once a week is plenty! When you open your jar to feed the ants, plenty of fresh oxygen will enter the jar as well…no need for holes! Keep your ant farm indoors, not too hot and not too cold, away from direct sunlight.

For more info on ants, check out some books at your local library and click here to see some fascinating photos and videos from National Geographic! Enjoy!!!

 

 

DIY Flower Fairies

I first made FLOWER FAIRIES with my youngest sister when we were kids. They are just so sweet, I couldn’t wait to make them again with my girls! L and I made these fairies this past week and we plan on making more tomorrow…I’m thinking garlands, magnets, and of course, just flower fairy dolls for playing pretend!

 

 

Materials needed:

  • florist wire
  • fabric flowers
  • wooden beads
  • other beads (wooden, plastic; colorful, plain)
  • acrylic paint
  • embroidery thread
  • scissors
  • hot glue gun and glue

First, paint simple, little faces on your wooden beads.

While your beads dry, take the artificial flowers apart. All you’ll need is the fabric petals. If you have any tiny flowers, set them aside to use for head decorations.

Cut a 14-inch piece of wire, and an 8-inch piece of wire. Fold the 14-inch piece in half.

With the smaller piece, bring both ends towards the center and twist the wire, leaving a little loop on each side for the fairy’s “hands.” Set aside.

 

 

Select the colors of embroidery thread you’d like to use for the fairy’s hair. Wrap the thread around all four of your fingers.

Place your looped, embroidery thread into the fold of the 14-inch piece of wire. Twist the wire, once to secure it in place.

Next, thread a “head” onto the wires (the large wire folded in half), followed by a couple small or medium-sized flowers.

 

Take the small wire piece (already folded and twisted into arms) and place it under the flowers, but in-between the two wires. If you like, you can fold each arm over once to secure the arms in place a little more.

Next, thread a bead onto the wire, followed by 2, 3, or more large flower petals.

At this point, separate the long wires into two legs. Fold each one in half and twist the wire, leaving a little loop on each end for the fairy’s “feet.”

 

Time to style some hair! You can twist the hair and glue it on top the fairy’s head. You can simply cut the thread loops and let it hang wild and free. Get creative with it!

 

To finish each flower fairy, glue a small flower on top of the hair. Too cute!!!

 

 

To host a tea party for your flower fairies, be sure to check out our “It’s Tea Time! Tea Party Ideas” page!

 

Egg Carton Flower Wreath

Can you believe this beautiful Spring wreath was made primarily out of egg cartons!?! I just love the outcome! I’ve wanted to make an EGG CARTON FLOWER WREATH for years! Last year we tried it, using tempera paints, but the colors weren’t nearly as vibrant. I highly suggest using acrylics for this project. Our EGG CARTON FLOWER WREATH hangs inside Our Beautifully Messy House, as we await the first blooms of spring flowers outside in our garden!

 

 

 

 

Materials needed:

  • 3 egg cartons
  • med-large cardboard piece
  • sharp scissors (fabric scissors)
  • acrylic paints
  • hot glue gun and glue

First, cut the egg cartons into flower shapes. Get creative! The pointy, divider sections can be used to make narrow flowers or daffodil trumpets and the lids of the egg cartons can be cut into leaves.

After all your flowers are cut, time to paint with your little ones! L and I painted side-by-side…when she was finished with a flower or bored with a color, I’d let her start on another one while I filled in any spots she may missed. After all the flowers were painted a solid color, I went back and painted on some details! Although the flowers look great in solid colors, the details really bring them to life…worth the extra 30 minutes of painting!

 

 

 

 

 

To make your wreath base, use some large mixing bowls to trace circles onto your cardboard and cut it out. I used two separate pieces of cardboard and just taped them together. Once your wreath base is cut out, give it a quick coat of green paint.

 

Next, using a hot glue gun, glue the leaves onto your wreath base randomly.

After the leaves are in place, glue the flowers on. Try to space the colors out, but don’t think too much about order. In nature, nothing is perfect and the imperfections themselves are beautiful!

 

 

 

 

Hang your wreath on a door, a wall or in your kitchen window! Enjoy!!!

 

Crazy Colored Easter Eggs

Last year was the first time we colored our Easter eggs in this fashion and oh my gosh, was it easy!!! These CRAZY COLORED EASTER EGGS are much cleaner and quicker to make than the traditional dyed Easter eggs! And aren’t they just beautiful???

 

 

Materials needed:

  • white eggs
  • pot with water
  • broken crayons
  • tin foil
  • large dish or pan
  • fork
  • tongs
  • glitter (optional)
  • towel for drying
  • parchment paper

First, put your eggs in the pot of water and on your stovetop to boil. I’ve always heard that 13 minutes is the magic number for perfectly cooked, hard-boiled eggs.

While your eggs cook, line your pan with tin foil. Also, prepare a place on your kitchen counter for your finished eggs…just a piece of parchment paper will do!

Make some crayon shavings, using a sharp knife. The more wild and beautiful your colors, the more wild and beautiful the eggs!

Sprinkle the crayon shavings on top of the tin foil and add glitter if you like too! You don’t need a whole lot of crayon shavings…less is really better to avoid big color mixtures turning the eggs into yucky shades of brown.

Once the eggs are cooked, use tongs to carefully move one egg at a time onto the towel to dry, and then into the pan of crayon shavings. Have your little one roll the egg around the shavings, pushing gently with the underside of a fork. Since the eggs are still very hot, the crayon shavings will melt immediately, painting the eggs!

 

 

 

 

After each egg is dyed, remove it with the tongs and lay it on the parchment paper to cool completely.  Repeat with the remaining eggs!

 

I just love our CRAZY COLORED EASTER EGGS!!! Beautiful!!! Enjoy!

DIY Tin Can Bird Feeder #2

To celebrate the last week of National Bird Feeding Month, L and I made these adorable TIN CAN BIRD FEEDERS! They are really easy to make, look beautiful and cost nothing…just go digging through your recyclables! Not only will the birds love this winter treat, this bird feeder would make a fantastic gift for your children to make for a friend, parent or grandparent!

IMG_0317

IMG_0150

IMG_0141

Materials needed:

  • tin can w/ lid
  • wooden paint stirrer
  • pliers
  • acrylic paints
  • hot glue gun
  • string
  • glossy sealant (optional)
  • church key can and bottle opener (optional)
  • bird seed

 

IMG_0107

IMG_0111

First, make sure your can is clean and remove the label.

IMG_0108

 

Using your hands, carefully bend the lid of the can in half. Using pliers, squeeze it flat.

IMG_0109

 

Using the hot glue gun, glue the paint stirrer inside the can. You can break the stirrer if it’s too long. This will be the birds’ perch.

IMG_0113

 

Next, glue the bent lid back into the can as pictured. Try not to make a huge mess with the hot glue gun, but if the glue shows it is no big deal…you will paint over it next.

IMG_0114

 

Paint the can any way you like.

 

IMG_0125

IMG_0128

IMG_0129

 

After the paint dries, you can use the can opener to make holes in the can from where you’ll hang it on a string. On one of our cans I placed two holes on the top…this bird feeder will hang from an old clothes line end.

IMG_0136

 

On our second can I made holes in the back of the bird feeder…this one we will tie onto a fence. I was careful to put the holes in the can after we painted it, because I wanted to avoid any sharp edges while L was handling the bird feeder.

IMG_0135

 

If you’d like your bird feeder to have a shiny, glossy finish, spray the can with a glossy sealant. It only takes 15-30 min to dry and will help protect the paint as well!

IMG_0137

 

Thread string through the holes of the bird feeder and fill with bird seed!

 

IMG_0138

IMG_0150

 

Now, find the perfect spot to hang your TIN CAN BIRD FEEDER! We placed one of ours right outside our kitchen window…the girls will love watching their little wildlife friends snack throughout the day! Enjoy!

 

IMG_0141

IMG_0144

IMG_0142

 

IMG_0191

 

In case you missed it, here’s the first DIY TIN CAN BIRD FEEDER we made! Another fun nature craft!

IMG_3262

Snow Candles

Ever since I was a kid I’ve always wanted to try making candles in the snow and today was the day!!! Such a cool experiment! I just love how they turned out! The sides of the SNOW CANDLES have this beautiful texture created by the crystals of snow. Just like snowflakes, each snow candle is unique!

IMG_0008

 IMG_0027

IMG_0028

IMG_0023

This is definitely a craft that should be done with adult supervision, though it is a fun one for kids of all ages.

Materials needed:

  • snow
  • paraffin wax
  • crayons
  • candle wicks
  • med/large pot for water
  • tin can or candle pouring pot
  • stick

 IMG_9999

First, decide what color you want your candles to be. Pick out 5 or 6 crayons all similar in color. L chose purples for our candles. Using a knife, cut a slit down the side of the crayon papers and peel the paper off.

 IMG_0003

Fill your pot with water about an inch high. Next place your pouring pot or tin can in the water creating a double boiler. (If using a tin can, make sure it is clean and the paper has been removed.) Place 3 blocks of paraffin wax and your crayons into the pouring pot or can. Bring the water to a boil, then turn the heat down to med-low so it’s at a simmer. ***Never melt wax directly on the stove top without the double boiler! The high heat may cause a fire!***

 IMG_0002

IMG_0004

Watch as the crayons and wax melt completely. Turn the stovetop off as you go outside to prepare your candle molds.

Outside you’ll need about a foot of snow. If the snow isn’t deep enough, you can use your hands to pile it up and lightly pack it down. Using a stick or a spoon handle, dig a little hole in the snow. We made ours about 4 inches deep and 1 to 2 inches wide.

 IMG_0005

Back inside, turn the stove back on for a couple minutes to heat up the wax again. Gather your candle wicks. When you’re ready, carefully remove the pouring pot or tin can (using an oven mitt) and quickly go outside to pour the wax into your molds. After a couple minutes, insert the wicks into your candles and hold in place until the wax hardens a bit…about 4-5 minutes.

 IMG_0007

IMG_0008

Leave your candles in the snow for an hour to harden completely. As the wax hardens, the candles take on their funky shape and texture. So cool!

 IMG_0014

Once they have hardened, carefully dig the candles out of the snow with your hands. Inside, use a knife to shave off some of the bottom of the candles if needed, so they will sit flat. Using scissors, trim the wicks to 1/2 inch high.

 IMG_0018

IMG_0020

Arrange on a dish or in a large bowl, add some decorative “fairy stones” if you like and enjoy!!! Beautiful!!!

 IMG_0025

IMG_0029