Category: DIY gifts

DIY No-Sew Rag Garland

Porter 3 Comments

Out of all the garlands I’ve made over the years, the RAG GARLAND has always been my favorite! It’s bright, colorful, super-easy to make and it looks fantastic inside or outside, day and night!

 

The RAG GARLAND is fun for the holidays, but can be made and used for any time of the year. I put ours up for Christmas, but I didn’t make the color scheme ultra-Christmassy…I love color and can’t seem to limit myself to just red and green! The best place to find cheap and funky fabric is at antique stores, thrift stores or flea markets…any leftovers can be used to make lil rag tag skirts or tutus for your little ones.

Materials needed:

  • fabric
  • scissors
  • string of lights

First, cut your fabric into strips about 2 inches wide and about 12 inches long.

 

Next, tie each fabric strip around the string of lights with a single, basic knot. If the fabric is blank on the underside, just fold the fabric over before knotting it. Repeat until the string of lights is covered.

 

 

 

 

This is a garland we made for Steamys, a local coffee shop/book store/gift shop in town. We used vintage fabrics to make it extra funky!

 

 

Happy garland making!!!

 

Low Fat Nutella-Banana Bread (Gluten Free)

Porter Leave a comment

Today I decided to incorporate Nutella into my favorite low fat banana bread recipe that I came up with years ago…and the results were amazing! Chocolatey, gooey Nutella mixed with sweet banana bread and the fat content works out to be only 2.5-3 grams per serving! This recipe made 12 muffins and one large loaf of bread.

Most people would probably mix the wet and dry ingredients separately and then combine, but I usually mix the wet ingredients then add the dry on top…mix the dry together a bit with a fork and then mix deeper, incorporating the wet ingredients.

 

Ingredients:

  • 5 ripe bananas
  • 1/3 cup applesauce
  • 3 eggs
  • 2 tsp vanilla
  • 3 cups flour (I use all purpose Gluten Free flour)
  • 1/2 cup white sugar
  • 1/2 cup brown sugar
  • 2 1/2 tsp baking powder
  • 1 tsp baking soda
  • 1-2 tsp cinnamon
  • 1/4-1/2 cup water
  • 3/4 cup – 1 cup Nutella

**If you want to “half” the recipe, you can use 2 bananas, 1 egg and 1 eggwhite.

Preheat oven to 350 degrees F.

First, mash the bananas in a large bowl (L’s favorite part!). Add the applesauce, eggs and vanilla and mix together.

On top of the wet ingredients, add the flour, sugar, baking powder, baking soda and cinnamon. With a fork, mix the dry ingredients a bit. Add water. Mix deeper with a fork, hand-held beater, or electric mixer…beat until all is combined.

Spoon Nutella into an oven-safe bowl and melt in the oven for a few minutes. Carefully remove the bowl from the oven and stir with a fork. Spoon in about 1/3 of the banana bread batter into the bowl with the Nutella and mix gently with the fork.

For muffins, I like to use silicone muffin cups…been using the same ones for years. No spraying or buttering necessary. Fill each muffin cup about halfway with the banana batter. Then add a spoonful of the Nutella mixture on each muffin. Top each one off with another spoonful of banana batter. Swirl each muffin gently with a toothpick.

 

 

Bake for 23-25 min. The “clean knife” testing method doesn’t work too well with this recipe because the Nutella will always be a little gooey. I knew ours were done when the tops of each muffin had turned golden brown.

To bake in a loaf pan, grease first with butter. Again fill about halfway with banana bread batter, then add Nutella mixture and finish off with more banana batter. Swirl with a knife. Bake for 40-50 min.

 

 

Yummmm!!! Enjoy!!!

 

Homemade Granola (Gluten Free)

Porter Leave a comment

Is there anything better this time of year than HOMEMADE GRANOLA, fresh out of the oven? It’s warm, a little chewy, and crunchy too. This granola is sweet and a bit salty, with a just a hint of cinnamon. Oh, how I love homemade granola!

I came up with this granola recipe years ago (a combination of Alton Brown’s, my mom’s, plus a few of my own additions) and I’ll warn you, it’s highly-addictive. The great thing about granola is that you can add or substitute some ingredients to make it your own. You could switch out some of the nuts with walnuts or peanuts, add a pinch of nutmeg or pumpkin pie spice. I like to use Pure Maple Syrup with this recipe, but if I have Apple Syrup from the farmer’s market on hand, it’s a delicious substitution! Granola is a wonderful gift for family and friends and this recipe makes plenty enough for two families. After it’s cooled completely just put half of the granola in a large mason jar with a ribbon tied around the lid and it’s ready to share! Enjoy!

 

Ingredients:

  • 6 cups of oats (I use Bob’s Red Mill, Gluten-Free, Rolled Oats)
  • 1 cup almonds, sliced
  • 1 cup pecan pieces
  • 1 cup cashews, raw
  • 1/2 cup sunflower seeds
  • 1 1/2 cups coconut
  • 3/4 cup brown sugar
  • 3/4 cup maple syrup
  • 1/2 cup vegetable oil
  • 1 1/2 tsp salt
  • cinnamon
  • honey
  • 1 cup raisins
  • 1 cup dried cranberries

 

Preheat the oven to 250 degrees F.

 

In a large bowl, mix together the oats, almonds, pecans, cashews, sunflower seeds, coconut, and brown sugar.

 

In a smaller bowl (or in a measuring cup!) mix together the maple syrup, vegetable oil and salt. If you have kids in the kitchen, they’ll enjoy seeing how the syrup and oil separate in the glass measuring cup before you mix it all up!

 

Pour the syrup-oil-salt mixture overtop the oats and nuts. Mix until everything is evenly and thorough coated. Spread the granola out into a large baking pan, or what I prefer…a large, non-stick roasting pan used usually for cooking turkeys or hams. Place in the oven. The total cooking time will be about 2.5 hours for such a large amount of granola, mixing every 15-30 minutes with a large spoon or spatula. Here is the schedule I tend to follow:

 

Cook 30 min. Mix.

Cook 30 min. Mix again.

Cook 30 min. Mix. Add HONEY in a zigzag, all over pattern.

Cook 15 min. Mix. Add more HONEY and sprinkle CINNAMON on top too.

Cook 15 min. Mix.

Cook 15 min. Mix.

Cook 15 min. Mix. Enjoy some hot and fresh!

Allow to cool for 15 min. Mix in RAISINS and DRIED CRANBERRIES.

 

 

Enjoy!!! And share!!!

 

 

Pine Cone Flowers

Porter Leave a comment

Have I mentioned before how much I love Fall?! So many things to find and create with…like these mini-pine cones! I’ve been thinking of making “pine cone flowers” for months now, and when L and I found these miniature ones it was a done deal.

Materials needed:

  • miniature pine cones
  • twigs (the more lil knobs and branches the better)
  • acrylic paints
  • hot glue gun and glue

First, choose what colors you’d like your “flowers” to be…we choose multi-colored! Paint each little pine cone as you like. Set aside to dry.

 

 

Next, paint your twigs a mixture of dark and light greens. Allow to dry.

 

Once everything is dry, you can assemble your pine cone flowers. Using a hot glue gun, put a little dab of glue on the tip of a twig. Quickly press and hold a pine cone in place. Repeat until all your pine cones are used up.

 

 

 

 

So cute, huh!? Arranged in a little, antique bottle they make a sweet gift for a child or an adult.

Leaf Prints…Pillowcases and T-Shirts

Porter Leave a comment

Ever since we put up L’s “big girl bed” a couple months ago I’ve been looking for the perfect pillow sham. I finally decided, “Why not just make one!?” And that’s exactly what we did today! I love the outcome…it turned out even better than I imagined it would! The pillow cover will last for years and we can always look back on this perfect Autumn day. We followed it up by making some matching Fall shirts for the girls as well!

 

Pillow Cover

Materials needed:

  • pillowcase, ironed if needed
  • a few scraps of cardboard
  • paper towels
  • acrylic paints
  • brushes and palettes (we use old, plastic lids)
  • leaves

 

Before you start painting, prepare your area. You’ll need a piece of cardboard to paint the leaves on top of and a piece of cardboard to slide into the middle of the pillowcase, so no paint seeps through. If the cardboard inside the pillowcase is ridged, you may want to add an old, silicone cutting board or piece of card stock underneath as well. You wouldn’t want the ridges to effect the leaf prints.

Starting with the larger of your leaves, paint the underside of the leaf and then carefully press it onto the pillowcase. Repeat with different colors, different shades and different sizes until you’re happy with your final project. We started with various shades of orange and then added a few reds, yellows and greens. Likewise, we started with large leaves and ended with a few tiny ones.

 

 

 

 

T-Shirts

Materials needed:

  • t-shirts, ironed if needed
  • a few scraps of cardboard
  • paper towels
  • acrylic paints
  • brushes and palettes (we use old, plastic lids)
  • leaves

You will basically make leaf prints onto your t-shirt in a similar manner as with the pillowcase above. The only difference is that you’ll want smaller cardboard pieces to slide into the shirt and one really narrow piece to slide into the sleeve. As you can see, after printing leaves on the center of the shirt I added one tiny, falling leaf to the sleeve.

 

 

 

 

 

Cute, huh!? And easy! What else will you make leaf prints on? I think an Autumn table runner would be beautiful as well! There are so many possibilities! Enjoy!

DIY Mason Jar Lid Pumpkins

Porter Leave a comment

This pumpkin craft is one of the simplest and sweetest of the season.  It’s not only cute for Halloween, but you can keep it up all the way through to Thanksgiving. The “mason-jar-lid pumpkin” could even be used to brighten up your Thanksgiving table centerpiece…your guests will adore it!

 

Materials needed:

  • about 20 mason jar lids (found in the grocery store)
  • glitter spray paint (orange, gold, silver)
  • cord or string
  • scissors
  • cinnamon sticks
  • decorative, floral wire (optional)

Outside or in a well-ventilated area, lay all the lids out on a flat surface. Spray half the lids with the orange spray paint, a quarter of them gold and the last quarter silver. (You can always change up your colors and do something different than what I did…all orange, all gold, no paint…it’s up to you!)

 

Let the lids dry overnight. Next, cut a piece of string about 2-3 feet long. Thread all your lids on the string, making sure they all face the same direction.

 

Pull the string tight and then tie a double-knot to secure the mason jar lids.

Move the lids around, arranging them into a pumpkin shape. Place 6 or 7 cinnamon sticks in the center for the pumpkin stem and (optional) add a curlicue of florist wire.

 

 

How cute is that!? And easy too! Now that I’ve made one for our house, I’ll be making a few more this week to give away as gifts. Enjoy!

Have you seen our DIY Witch Legs??? That’s another one you’ll be sure to love!!!

DIY Witch Legs

Porter Leave a comment

So I looked around for a tutorial online for how to make “Witch Legs” and they were all much more complicated than they needed to be! People using irrigation tubing, tube socks with sand and tape, mannequin legs, etc… I don’t know about you, but I’m all for cheap and easy! So I tried it my way, fingers-crossed that it’d work out, and it did! I just love our witch legs…costing under $10, they took about 15-20 minutes to make!

Materials needed:

  • heeled, sparkly shoes (find them at a thrift store!)
  • kids, knit halloween tights
  • poly fil stuffing
  • hot glue gun and glue
  • scissors

(I originally thought I’d decorate the shoes with some pipe cleaner curlicues, but they ended up looking best without! That’s why the pipe cleaners are pictured here, if you’re wondering.)

First, stuff the tights with the poly fil. Leave about 4-5 inches at the top not stuffed.

Next, cut the legs off the tights, as far to the top as possible. Then tie a knot in each.

 

Position one foot into a shoe to have a good idea how it will set. Then, starting with the toes, glue each foot into the shoe. It’s okay if the “foot” is smaller than the shoe…it probably will be because they’re adult shoes and kid’s tights. You can continue pushing the leg down into the shoe just past the heel and nobody will be able to tell the difference.

 

And now for the fun part…find the perfect spot to display your witch legs and surprise the neighbors! If you have an overhanging porch on your house or a large bush in the yard, you can hide the ends underneath. There’s about a half-inch gap between the siding of our house and the front porch that I was able to wedge the ends down into. A big flower pot set on top would work too! Get creative and have fun! Ding-dong the wicked witch it dead!!!

 

 

DIY Autumn Leaf Bookmarks

Porter Leave a comment

We are so, so excited in Our Beautifully Messy House that Fall has finally arrived and with it new projects and crafts to do! Nature offers so many free materials this time of year…from brightly colored leaves to acorns and buckeyes of all different sizes, not to mention weird and crazy seed pods. These Autumn Leaf Bookmarks were just too perfect for me to do this week with the new addition of our Little Free Library at our house, as well as all the leaves starting to change and fall in our backyard!

Materials Needed:

  • empty cereal or cracker box
  • scissors
  • gold acrylic paint
  • brightly colored leaves
  • hot glue gun and glue
  • Mod Podge and brush

First, cut your cereal box cardboard into bookmark-shapes. I did some thin ones with square edges and a couple thicker ones with rounded edges…both turned out great!

After cutting your bookmarks, paint a couple layers of gold acrylic paint on each side. The paint job doesn’t have to be perfect since the leaves will cover up most of the cardboard.

Once the paint has dried completely, it’s time to glue on your leaves. First, prepare your leaves by cutting the stems off.

Start with one of your larger leaves, and apply the glue directly onto the bookmark. After you’ve pressed your leaf into the glue,  smooth it down as flat as possible, working from the center of the leaf out. And work quickly…hot glue dries super-fast!

Once the central part of your leaf is attached, apply small dabs of glue to the edges and tips of the underside of the leaf and continue to smooth it flat. Fold over-hanging tips around and glue to the opposite side. Continue layering and gluing leaves on both sides.

 

 

 

Once all the leaves are attached, examine the bookmark and try to remove any little pieces of hot glue that may be visible. Now paint one or two coats of Mod Podge on each side of the bookmark. The Mod Podge helps preserve the leaves and their bright colors. It also makes the bookmark a bit more durable!

Too easy, right? It makes such a cute, lil gift for a friend or neighbor! Check back for many more Fall crafts to come in the next couple months! Enjoy!

 

 

 

DIY Wind Chimes

Porter Leave a comment

I love finding new uses for old things and I’ll take any excuse to peruse an antique store, so making these wind chimes was the perfect project for L and me! Like most of our home decor projects, L couldn’t help with everything, but I let her help where she could…she painted all the keys and picked out all the buttons we used. Your wind chime doesn’t have to include everything ours does, but hopefully it inspires you to make one with things you do have around the house!

 

 

 Materials for Wind Chime #1:

  • antique cheese grater
  • old buttons
  • keys
  • an old prism
  • sturdy thread or cord
  • acrylic paint
  • glossy sealant spray

 Materials for Wind Chime #2:

  • antique, silver candy dish
  • old buttons
  • keys
  • an old prism
  • sturdy thread or cord
  • acrylic paint
  • glossy sealant spray

For Wind Chime #1, which we made for my younger brother, I painted an old cheese grater that I had found at an antique store. While I painted the cheese grater, L painted a bunch of old keys. Once the keys dried, we turned them over and painted the other side different colors. After both sides were painted and dried, I sprayed the keys and the cheese grater with a glossy sealant. It gives the items a more finished look and will help them stand up to the weather a little better too.

 

 

 

 

First, figure out how you’d like your wind chime to hang…for instance Wind Chime #1 was hung on a slight angle, so the painting was visible. Wind Chime #2 was an antique candy dish hung upside-down. Hang the wind chime between two chairs while you work on it. This makes fastening all your keys and buttons soooo much easier!

To assemble the wind chime, we first laid out all the materials we had on hand…buttons, keys, old thread spools, and prisms. From here we decided what we wanted the wind chime to look like and started piecing it all together. It’s a great opportunity to talk about patterns with your little ones!

After everything was strung-up and fastened the way we liked it, I put a spot of crazy-glue on each knot and cut the extra strings. Now for the fun part…ready to wrap it up and give it away as a gift or find the perfect spot for your wind chime to hang! What will your wind chime look like?

 

 

 

 

DIY Melted Crayon Art with Variations

Porter Leave a comment

This was the perfect “rainy day craft” for today…fun for me and for L! I’m so excited about these melted crayon creations, I can’t wait to make more! Let’s jump right in…

 

Materials needed:

  • white canvas
  • crayons
  • hot glue gun and glue
  • cardboard box
  • hair blowdryer

Although there’s definitely some unpredictability in this project, you first need to plan it out a bit. Start with picking out your colors.

 

After deciding where your crayons will go, use the hot glue gun to attach them to the canvas.

 

 

Next, place the canvas in a cardboard box. The box will keep your work area clean, catching the crayon splatter.

Prop the box up against a chair, table, or wall. Make sure the crayons are facing down (if you want a dripping effect) and that the box and canvas are on a little bit of an incline.

 

Next for the fun part, use the hair dryer to melt the crayons and blow the wax around. I let L do most of the rainbow picture. Turned out pretty awesome, huh!?

 

 

Now, display your work in whichever direction you please. I think a ribbon pinned or glued around the outside edges of the canvas would give it a nice, finished look!

Variations:

Wildflowers

To make the wildflower piece, I used mostly greens and browns. After I was done melting the crayons and the wax had time to cool down, I used the hot glue gun to attach flowers. Do this step carefully, so no glue shows! It works best to glue the flowers on spots without any wax.

 

 

 

 

 

Wild Splatter

I experimented with this one a bit, trying to plan for some future creations. I kept the box flat to the ground and used broken crayon pieces. To hold the crayons in place while melting them, I used a fork and smudged them around a bit. The outcome was a little funky…next time I’ll use smaller crayon pieces and maybe some crayon shavings instead.

 

 

 

 

 

I’m hoping to make a vibrant, Autumn tree next! I’ll be sure to update the blog and add those pictures as well, so check back soon!!! What “melted crayon art” will you make???