Crazy Colored Easter Eggs

Last year was the first time we colored our Easter eggs in this fashion and oh my gosh, was it easy!!! These CRAZY COLORED EASTER EGGS are much cleaner and quicker to make than the traditional dyed Easter eggs! And aren’t they just beautiful???

 

 

Materials needed:

  • white eggs
  • pot with water
  • broken crayons
  • tin foil
  • large dish or pan
  • fork
  • tongs
  • glitter (optional)
  • towel for drying
  • parchment paper

First, put your eggs in the pot of water and on your stovetop to boil. I’ve always heard that 13 minutes is the magic number for perfectly cooked, hard-boiled eggs.

While your eggs cook, line your pan with tin foil. Also, prepare a place on your kitchen counter for your finished eggs…just a piece of parchment paper will do!

Make some crayon shavings, using a sharp knife. The more wild and beautiful your colors, the more wild and beautiful the eggs!

Sprinkle the crayon shavings on top of the tin foil and add glitter if you like too! You don’t need a whole lot of crayon shavings…less is really better to avoid big color mixtures turning the eggs into yucky shades of brown.

Once the eggs are cooked, use tongs to carefully move one egg at a time onto the towel to dry, and then into the pan of crayon shavings. Have your little one roll the egg around the shavings, pushing gently with the underside of a fork. Since the eggs are still very hot, the crayon shavings will melt immediately, painting the eggs!

 

 

 

 

After each egg is dyed, remove it with the tongs and lay it on the parchment paper to cool completely.  Repeat with the remaining eggs!

 

I just love our CRAZY COLORED EASTER EGGS!!! Beautiful!!! Enjoy!

I Spy Bottle and Games

How many of you grew up loving the “Where’s Waldo?” books by Martin Handford or the “I Spy” books by Jean Marzollo and Walter Wick? My brothers, sisters and I adored them and now, L enjoys reading them too! The I SPY BOTTLE is very similar in principal and so much fun! It’s a fully contained game…no pieces to lose or to pick up! We take our bottle with us to restaurants on occasion and always on long car trips. The I SPY BOTTLE would be great fun in a classroom too! Be sure to scroll down, after the “how to” I’ve shared a few ideas of games to play.

Materials needed:

  • clear bottle with a wide mouth
  • rice
  • electrical tape
  • lots of small objects

First, remove the label from your bottle and clean and dry it completely. Goo Gone always works great for removing any stickiness and label residue! Fill the bottle a little over halfway with white rice.

Next, drop your objects in. We used beads, a bouncy ball, a plastic ring, spoon, animal figures, a marble, dice, a stamp, buttons, a clothespin, a rubber band, a paperclip, a toy car, keys, a wine cork, and although pictured is a crayon, I switched it out with a paintbrush. I was afraid the crayon would melt if left in the car!

 

Once the rice and objects are inside the bottle, use electrical tape to seal the lid closed. You could always use super glue, but I was afraid a time would come that we’d want one of the objects locked inside!

Now, time to shake your bottle up and play!!!

 

 

 

Different ways to play:

  • Call out the color of an object…”I spy something green!”…and have the other person find it.
  • Call out the function of an object…”I spy something that makes art!”…”A paintbrush!”
  • Things that rhyme. “I spy something that rhymes with ‘moon.'”…”Spoon!”
  • If your children can read, you could make little cards that go along with the I SPY BOTTLE too. How perfect would that be for a long car ride? Easy entertainment! Enjoy!!!

 

 

DIY Tin Can Bird Feeder #2

To celebrate the last week of National Bird Feeding Month, L and I made these adorable TIN CAN BIRD FEEDERS! They are really easy to make, look beautiful and cost nothing…just go digging through your recyclables! Not only will the birds love this winter treat, this bird feeder would make a fantastic gift for your children to make for a friend, parent or grandparent!

IMG_0317

IMG_0150

IMG_0141

Materials needed:

  • tin can w/ lid
  • wooden paint stirrer
  • pliers
  • acrylic paints
  • hot glue gun
  • string
  • glossy sealant (optional)
  • church key can and bottle opener (optional)
  • bird seed

 

IMG_0107

IMG_0111

First, make sure your can is clean and remove the label.

IMG_0108

 

Using your hands, carefully bend the lid of the can in half. Using pliers, squeeze it flat.

IMG_0109

 

Using the hot glue gun, glue the paint stirrer inside the can. You can break the stirrer if it’s too long. This will be the birds’ perch.

IMG_0113

 

Next, glue the bent lid back into the can as pictured. Try not to make a huge mess with the hot glue gun, but if the glue shows it is no big deal…you will paint over it next.

IMG_0114

 

Paint the can any way you like.

 

IMG_0125

IMG_0128

IMG_0129

 

After the paint dries, you can use the can opener to make holes in the can from where you’ll hang it on a string. On one of our cans I placed two holes on the top…this bird feeder will hang from an old clothes line end.

IMG_0136

 

On our second can I made holes in the back of the bird feeder…this one we will tie onto a fence. I was careful to put the holes in the can after we painted it, because I wanted to avoid any sharp edges while L was handling the bird feeder.

IMG_0135

 

If you’d like your bird feeder to have a shiny, glossy finish, spray the can with a glossy sealant. It only takes 15-30 min to dry and will help protect the paint as well!

IMG_0137

 

Thread string through the holes of the bird feeder and fill with bird seed!

 

IMG_0138

IMG_0150

 

Now, find the perfect spot to hang your TIN CAN BIRD FEEDER! We placed one of ours right outside our kitchen window…the girls will love watching their little wildlife friends snack throughout the day! Enjoy!

 

IMG_0141

IMG_0144

IMG_0142

 

IMG_0191

 

In case you missed it, here’s the first DIY TIN CAN BIRD FEEDER we made! Another fun nature craft!

IMG_3262

DIY Toy Vacuum (that Really Cleans!!!)

I love showing my kids that with a little creativity and a basketful of recycling materials you can make just about anything! One morning L woke up asking me to make her a vacuum…strange request, but I accepted the challenge. My thoughts immediately went to that toy vacuum from yesteryear with the popping balls inside. Kids love those things because of the noise they make, so I knew ours had to be similar. The only thing to improve upon that vacuum would be to make one that cleans as well! So here you have it — a toy vacuum that essentially costs you nothing (assuming you have all the materials) and it actually cleans the floors while your kid plays!

Materials needeed:

  • Swiffer sweeper w/ dry swiffer pad
  • empty milk carton
  • plastic container (like one berries come in)
  • plastic beads
  • duct tape
  • paper towel tube (optional)
  • hot glue gun
  • scissors

First, using scissors or a knife, cut a little window on the front of the milk carton. Cut a piece of clear plastic off of the plastic container to cover the window.

Using a hot glue gun, carefully glue the clear plastic in place over the “window.”

Cover the entire milk carton in duct tape. Make sure you cover up the glued edges of the plastic window as well…this should eliminate any sharp or pointy edges.

Next, have your little one help you drop beads into the carton. A few handfuls will do. Screw the lid back on the carton.

If your Swiffer sweeper’s handle has removable links (which I think they all do), remove the two middle ones to make it a more suitable height for your child.

Now the next step you can do in two ways: you can tape the milk carton directly onto the Swiffer sweeper…it may be more secure, but it may also leave some duct tape residue on the Swiffer. (That would be the more permanent option.) Or, you can glue and tape a paper towel tube onto the back of the milk carton and slide it onto the Swiffer’s handle. We went with the later…I thought it may jiggle more and make a louder, bead-popping sound too!

Now to clean floors…just replace the Swiffer pad as you would normally do and let your child go to work! (I mean play!) I really thought ours would last a couple weeks, but we’re going on 4 months now and every week L asks if she can help “vacuum” the floors. Enjoy!!!

 

Snow Candles

Ever since I was a kid I’ve always wanted to try making candles in the snow and today was the day!!! Such a cool experiment! I just love how they turned out! The sides of the SNOW CANDLES have this beautiful texture created by the crystals of snow. Just like snowflakes, each snow candle is unique!

IMG_0008

 IMG_0027

IMG_0028

IMG_0023

This is definitely a craft that should be done with adult supervision, though it is a fun one for kids of all ages.

Materials needed:

  • snow
  • paraffin wax
  • crayons
  • candle wicks
  • med/large pot for water
  • tin can or candle pouring pot
  • stick

 IMG_9999

First, decide what color you want your candles to be. Pick out 5 or 6 crayons all similar in color. L chose purples for our candles. Using a knife, cut a slit down the side of the crayon papers and peel the paper off.

 IMG_0003

Fill your pot with water about an inch high. Next place your pouring pot or tin can in the water creating a double boiler. (If using a tin can, make sure it is clean and the paper has been removed.) Place 3 blocks of paraffin wax and your crayons into the pouring pot or can. Bring the water to a boil, then turn the heat down to med-low so it’s at a simmer. ***Never melt wax directly on the stove top without the double boiler! The high heat may cause a fire!***

 IMG_0002

IMG_0004

Watch as the crayons and wax melt completely. Turn the stovetop off as you go outside to prepare your candle molds.

Outside you’ll need about a foot of snow. If the snow isn’t deep enough, you can use your hands to pile it up and lightly pack it down. Using a stick or a spoon handle, dig a little hole in the snow. We made ours about 4 inches deep and 1 to 2 inches wide.

 IMG_0005

Back inside, turn the stove back on for a couple minutes to heat up the wax again. Gather your candle wicks. When you’re ready, carefully remove the pouring pot or tin can (using an oven mitt) and quickly go outside to pour the wax into your molds. After a couple minutes, insert the wicks into your candles and hold in place until the wax hardens a bit…about 4-5 minutes.

 IMG_0007

IMG_0008

Leave your candles in the snow for an hour to harden completely. As the wax hardens, the candles take on their funky shape and texture. So cool!

 IMG_0014

Once they have hardened, carefully dig the candles out of the snow with your hands. Inside, use a knife to shave off some of the bottom of the candles if needed, so they will sit flat. Using scissors, trim the wicks to 1/2 inch high.

 IMG_0018

IMG_0020

Arrange on a dish or in a large bowl, add some decorative “fairy stones” if you like and enjoy!!! Beautiful!!!

 IMG_0025

IMG_0029

DIY Chocolate Orange Sugar Scrub

As we move towards Spring, I keep thinking of citrus, lemon-blueberry muffins, lemonade and sunshine! Unfortunately though, we’re not quite there yet…wind chills today in the negative digits! I think it was 4 degrees out when we woke up this morning! Brrr… And let me tell you, this cold weather is not helping the chocolate addiction I acquired over the holidays. So with all that stirring around inside of me, I dreamed up this CHOCOLATE ORANGE SUGAR SCRUB and it is divine!!! Just what I needed today! This would be great to use in the bath or shower!

 IMG_9978

 

Ingredients:

  • 1 cup white sugar
  • 1/2 cup brown sugar
  • 2 Tbsp cocoa powder
  • 3 Tbsp olive oil (almond oil or coconut oil)
  • ~15 drops (1/2 tsp) Sweet Orange oil
  • 1-2 tsp orange zest (optional)

 IMG_9969

 

First, mix together the sugars with a fork. If your brown sugar is clumpy, try to mix until most of the clumps are gone.

 IMG_9970

 

Mix in the 2 Tbsp of cocoa powder.

 IMG_9971

 

Next, stir in the olive oil one Tbsp at a time. Some olive oils are pretty potent…if you have almond or coconut oil on hand you can certainly substitute that for the olive oil. I’m all about using what I already have though…and it turned out great!

 IMG_9972

 

Once the olive oil is added, stir in some Sweet Orange Oil. (I found mine in the organics section of our grocery store.) To really bring the aroma up a notch, add about 2 tsp of orange zest to the scrub! Now it is certainly good enough to eat, but even better to exfoliate your skin with in the bathtub! The sugars will scrub away any dry, dead skin and the oil will leave you with just the right amount of moisture.

 IMG_9973

 

 

Spoon your concoction into 2 jars…one for you and one for a friend! Enjoy!!!

 IMG_9977

 

Bird Feeder Garland and Bird Feeder Ornaments

The BIRD FEEDER GARLAND is one of my favorite Winter crafts. It’s fun to make and even more fun to watch the wildlife activity that arises in our backyard after we hang it up! This week we’ve watched birds nibbling, followed by squirrels chasing the birds, then snacking themselves, and lastly, we observed four neighborhood cats stalk the squirrels for two days straight. Easy Winter entertainment…the girls and I have been glued to our kitchen window! The BIRD FEEDER GARLAND itself looks beautiful hanging in a tree, around a bush, or along a fence!

IMG_9838

Materials needed:

  • dental floss
  • unsalted peanuts in their shells
  • old apples, oranges, cranberries and/or raisins
  • embroidery needle
  • cardboard

 

IMG_9795

Thread the dental floss into the needle. I use dental floss for lots of projects, because it’s always on hand and is super-sturdy! Using the needle, string the peanuts onto the dental floss. Having cardboard under the peanuts, makes it easier to push the needle through. Tie a knot after you string the first peanut to hold the rest on!

 

IMG_9797

IMG_9796

IMG_9799

 

You can cut an apple into small pieces to string as well. If you have dried fruit, you can string that along with the peanuts too.

 

IMG_9798

 

My helper squirreling away some apple bits…

IMG_9800

 

Once the peanuts are all strung, find the perfect place to hang your BIRD FEEDER GARLAND!

 

IMG_9832

IMG_9830

 

The BIRD FEEDER GARLAND looks great on it’s own, but to really give the birds a treat, add some BIRD FEEDER ORNAMENTS as well! Kids love helping with this part!

IMG_9842

 

Materials needed:

  • dental floss
  • pinecones
  • peanut butter
  • bird seed
  • butter knife
  • 2 plates

 

IMG_9803

First, tie the dental floss in a knot or two around the top of the pinecone.

 

IMG_9804

Using a butter knife, slather on some peanut butter.

 

IMG_9805

IMG_9806

 

Pour some bird seed out on a plate and let your little one roll the peanut butter-covered pinecone through the bird seed.

IMG_9811

 

Hang the pinecones from your BIRD FEEDER GARLAND!

 

IMG_9819

You can also slice some apples and/or oranges to hang from the garland. And if you make these DIY Cereal Bird Feeders, you can add them as well! Enjoy!!!

IMG_9820

IMG_9709

 

 

DIY Cereal Bird Feeder

Being that February is National Bird-Feeding Month, I thought we’d make and share a few homemade, bird feeders with you over the next few weeks! This DIY CEREAL BIRD FEEDER may be the quickest and easiest one to make! I remember making similar ones when I was in grade school. So cute!

 IMG_9709

 

IMG_9711

 

 

Materials needed:

  • pipe cleaners (or other thin wire)
  • O-shaped cereal (non-sugary)
  • ribbon

 IMG_9691

 

First, bend the wire in half gently, making a V-shape.

 IMG_9692

 

Have your little ones string the cereal onto the wire, as you would with beads. Leave about 1/2 – 1 inch of the wire showing at the ends.

 

IMG_9696

IMG_9698

 

Twist the ends together and shape into a heart.

 

IMG_9699

IMG_9700

 

Tie some ribbon in the middle of your bird feeders and hang them outside for the birds!

 

IMG_9702

IMG_9711

 

Notice the hearts are rather light, so hang them up in a bush or against a tree trunk…someplace protected from the wind. Enjoy!

 IMG_32621

 

Check out our DIY TIN CAN BIRD FEEDER as well!

It’s Tea Time!!! Tea Party Ideas

Over at Our Beautifully Messy House, we love a good TEA PARTY! We have breakfast tea parties and mid-afternoon tea parties, tea parties in a teepee outside, and tea parties on the kitchen floor! We have tea parties with friends and tea parties with fairies! There is only one rule in our house when it comes to having a tea party: Everyone must wear a hat! It doesn’t matter if you are still wearing your pajamas, everybody starts the tea party with a hat!

 

IMG_9142

IMG_9633

IMG_6466

 

If you’re planning ahead, you can make some “Floppy Newspaper Hats” for tea time! (DIY here.)

IMG_7266

 

Tea Ideas

Obviously you can steep any flavor of tea, but with little kids you may want to get creative! Sometimes I pour L half a cup of Blueberry Wild Child Tea, fill the rest with milk and she drinks it out of her fancy tea cup with a straw. Anything goes! Kids can drink water, milk, juice mixed with water, or hot chocolate…if it’s in a tea cup, it’s tea!

 

IMG_8855

 

Tea Cups

Tea cups don’t have to be fancy, but fancy is fun! The best place to find tea cups is at antique stores, yard sales and flea markets. Such places are filled with tea pots and cups and, at only a couple of dollars a piece, it’s no big deal if one breaks.

 

IMG_9635

Tea Party Treats

For breakfast tea parties, we make PANCAKE SANDWICHES with cream cheese and strawberry jam layered in-between two pancakes. To make them extra fancy, cut the pancakes with a heart cookie cutter and let the red, strawberry jam shine through!

 

IMG_8833

These Strawberry Jam Scones are perfect for tea time! Get the recipe here.

IMG_9157

 

No-Bake Acorn Treats are fun and yummy for your tea party outdoors! Get the quick and easy how-to here.

IMG_7737

 

If you’re just throwing together a tea party last minute, anything will do…a granola bar cut into bites, muffins, a bowl of popcorn. Your kids will love it!

A Tea Party for Fairies

IMG_9127

 

If you don’t have fairies and fairy furniture, you can easily make some!

IMG_9148

DIY Fairy Folk

 

IMAGE_1841

DIY Fairy Furniture

IMAGE_2311

Acorn Cap Treasures (aka Fairy Hats!)

Use cheerios to make FAIRY DONUTS. If you have a microwave, simply place one chocolate chip on top of a cheerio and zap it for a few seconds. Top with mini-sprinkles! We don’t have a microwave and melted the chocolate chips in a double-broiler on the stove-top and it worked just as well! For powdered fairy donuts, dip the cheerios in some maple syrup and then toss around in some powdered sugar. Silly, sweet, and so much fun!!!

 

IMG_8598

IMG_9123

 

If you don’t have a mini-tea set, you can use buttons for fairy plates and thimbles for the tea cups. Have the tea party on top of a box or a colorful pillow!

IMG_9131

IMG_9408

 

Please don’t think that if you have little boys that they can’t partake in your tea party fun! Everybody loves a party and if you must, call it a “picnic!” Enjoy!!!

 

IMG_8769

 

PVC Pipe Ball Drop / Water Run

We made this PVC PIPE BALL DROP / WATER RUN last Summer to take with us to the beach…beach houses usually have large windows and sliding doors so I knew it’d be the perfect place to test it out. We originally used corn kernels to drop through the tubes, which turned out to be a huge mess, but we had fun!!! As cabin fever set in this week with cold, snowy weather outside I decided to bring out the PVC PIPE BALL DROP / WATER RUN again! This time we used poof balls (as well as plastic fairies and frogs) to drop through the tubes and it worked great! You could also put this up in the shower and dump water through the tubing to make a water run…I think we’ll try that next! The materials for this project only cost about $10 and it provides hours of fun!

 

IMG_9538

IMG_9528

 

Materials needed:

  • PVC connectors and elbows
  • suction cups
  • drill
  • flathead screw driver
  • poof balls, beans, feathers, pennies…

We found these suction cups at the craft store and they were perfect…just remove the little, metal hook.

 IMG_9455

 

First, drill a hole in the middle of one side of each PVC connector. Compare the suction cup piece with the drill bits to figure out the right size to use…you can always drill a bigger hole if need be, so start with the smaller bit if you’re deciding between two. Using the flat head screw driver, pry and poke the suction cup into the PVC connector.

IMG_9456

IMG_9452

IMG_9453

 

 

Now, time to play!!! Press the tubes onto a sturdy glass door or window and let the fun begin! It’s fun letting the kids experiment with placement of the tubes!

 

IMG_9480

IMG_9464

 

If your “Ball Drop” has two starting places, it’s fun to race the balls down…see whose comes out first!

 IMG_9471

IMG_9490

 

 

To mix things up, give your kid a spoon or tongs to pick the balls up and drop them down!

 IMG_9552

IMG_9559

 

 

Get crazy! Have fun! Enjoy!!!