DIY Fairy Folk

L and I made these FAIRY FOLK this morning and she’s been playing with them all day long! She loves them!!! L has made up a house, a bed, a car for them…a phone, bathtub, table and chairs, a crib and even a change of clothes! Tomorrow we shall have a “Fairy Tea Party” in their honor. The fun never stops around here!

IMG_9038

IMG_9033

 

Materials needed:

  • wooden peg people
  • acrylic paints
  • felt or fabric scraps
  • hot glue gun and glue

 

 

 

 

 

IMG_8991

First, paint the fairies’ bodies.

IMG_8992

 

Next, paint hair and eyes on the fairies. I tried to make each of ours a little different.

IMG_9003

 

Then draw and cut a little fairy wing stencil. You can trace this on the felt or fabric before cutting out the wings. After a few, I just winged it! Ha! I liked having some big, some small. (Cut a few extras for fairy “outfits.”)

IMG_9004

IMG_9005

IMG_9008

To complete the fairies, attach the wings to the bodies using just a touch of glue with your hot glue gun. Now, time to play!!!

IMG_9009

IMG_9010

IMG_9011

Our “Acorn Cap Treasures” were perfect for the fairy folk. As was the “Fairy Furniture” we made last Summer.

IMG_9033

 

A toy teacup was just the right size for a bath and one of WB’s socks made a roomy bed.

IMG_9026

IMG_9027

 

The fairies also enjoyed skating on this melted-bead ice rink and, of course, driving in their jam jar car.

IMG_9020

IMG_9024

 

A change of wings for the fairies…

IMG_9039

 

I’ll be sure to post our Fairy Tea Party details later this week so your lil ones can join in the fun! Enjoy!

IMG_9025

DIY Flower Garden Entrance

I made this FLOWER GARDEN ENTRANCE for WB’s first birthday this week and I just love how it turned out! We put it up in our kitchen, but eventually we’ll move it to brighten up the entrance to her bedroom! A FLOWER GARDEN ENTRANCE is the perfect decoration for birthday parties, tea parties, or anytime you want to bring a little sunshine inside! You could hang it in a doorway or above a window!

 

IMG_8968

IMG_8966

Materials needed:

  • adjustable shower curtain rod
  • 2 rolls of green tulle
  • silk flowers
  • florist tape
  • hot glue gun and glue
  • piece of string

(Silk flowers are on sale during the winter months at most craft stores…I got these all 50% off!)

IMG_8957

 

First, I measured the height and width of the doorway where our FLOWER GARDEN ENTRANCE would be. Our house is old with doors of various heights and widths…I wanted to make sure that if I made it in the kitchen doorway it would fit in the doorway to my daughter’s room.

Next, put up the curtain rod and tie a piece of string around the middle. You will thread the tulle through this, so make it not too tight, but not too loose.

IMG_8950

 

Now thread the tulle through the string, cutting strips in similar lengths. The tulle will travel along the top of the rod and straight down (see the next steps), so measure and cut accordingly.

 

IMG_8953

IMG_8952

 

Next, wrap a small scrap of tulle around the middle a few times, tie and cut. You can now remove the string that was holding everything up.

 

IMG_8954

Do the same at both ends of the curtain rod…wrapping a scrap of tulle around the long tulle strands, tie and cut.

 

IMG_8955

IMG_8956

 

Now, figure out where you want your flowers to go. For long stems, I used floral tape to secure them to the curtain rod in various spots. With individual flowers, I just used a hot glue gun to glue them in place. Other smaller stems can be tucked in and behind the rest and may not even need tape or glue.

 

IMG_8960

IMG_8958

IMG_8959

 

And finally, pick a few small, delicate flowers to glue in place along the long strands of tulle. My favorite and final touch!

IMG_8964

IMG_8968

IMG_8966

My girls were so excited to find this hanging in the kitchen this morning! Easy, beautiful and fun!!!

Leaf “Glitter” Art

As the girls and I were crunching our way through leaves this week, this leaf “glitter” project came to mind. The leaves in our neighborhood are changing yet again…this time from their vibrant reds and oranges to dried-up, crunchy browns. No fear though, we can get one more craft out them!

Materials Needed:

  • crunchy leaves
  • paper (look in the recycling basket first!)
  • white glue
  • a small container or bowl

First, crumble the leaves into the tiniest pieces possible and collect them in a small dish.

Next, draw a Fall picture on the paper with the white glue. Feel free to draw some for your little ones, but let them scribble a glue picture too!

 

Now, as you would do with glitter, sprinkle the leaf dust all over the glue. This was definitely L’s favorite part.

 

 

 

Once the glue is all covered, gently shake the excess leaf “glitter” off and reveal your masterpiece!

 

 

 

Pumpkin Seed Necklaces

There’s a lot of pumpkin carving going on this week, so I thought I’d hurry and get this one out there! Have you ever turned your pumpkin seeds into jewelry? The key to stringing pumpkin seeds with ease is to make sure that they’re fresh…no baked or thoroughly dried pumpkin seeds here! This year we tried dying some seeds before stringing them too. This craft is super easy and so much fun!

Materials needed:

  • fresh pumpkin seeds
  • dental floss, embroidery floss, or thread
  • sewing needle

For colored seeds you’ll also need:

  • food coloring
  • vinegar
  • boiling water

As you carve your jack-o-lanterns, separate the pumpkin seeds from the pulp. Rinse the seeds in some water to get any excess pumpkin guts off.

 

 

If you’d like some colored seeds, boil a cup of water. Add 1-2 tsp of vinegar and lots of food coloring. (I basically followed the directions for dying eggs on the food coloring box, adjusting it a little bit.) Let the water mixture boil for 5 minutes.

Turn the stove off and add your pumpkin seeds. Let them sit for 15-20 minutes, stirring the seeds a couple times, until you achieve the color you like.

Pour your seeds into a colander to drain them and run some cold water over the seeds briefly. Spread the seeds out on some cardboard to dry a bit. You can pat them dry with a paper towel too if needed.

Now, time to make some necklaces! Using the needle and thread (or dental floss), string the seeds on one at a time. If the seeds are a little tough, you can lay them flat on cardboard and push the needle through.

 

This is a great time to talk to your kids about patterns! Have your little ones pick out seeds and lay them in order to help you string. When you’re finished threading seeds, tie the ends in a knot or two to complete! Enjoy!

 

 

Some early morning necklace-making in our pajamas in Our Beautifully Messy House…

 

 

Pine Cone Flowers

Have I mentioned before how much I love Fall?! So many things to find and create with…like these mini-pine cones! I’ve been thinking of making “pine cone flowers” for months now, and when L and I found these miniature ones it was a done deal.

Materials needed:

  • miniature pine cones
  • twigs (the more lil knobs and branches the better)
  • acrylic paints
  • hot glue gun and glue

First, choose what colors you’d like your “flowers” to be…we choose multi-colored! Paint each little pine cone as you like. Set aside to dry.

 

 

Next, paint your twigs a mixture of dark and light greens. Allow to dry.

 

Once everything is dry, you can assemble your pine cone flowers. Using a hot glue gun, put a little dab of glue on the tip of a twig. Quickly press and hold a pine cone in place. Repeat until all your pine cones are used up.

 

 

 

 

So cute, huh!? Arranged in a little, antique bottle they make a sweet gift for a child or an adult.

Water Lens

I don’t know a kid (or an adult) who doesn’t love playing with a magnifying glass. They’re just mesmerizing! The “water lens” experiment is such a fun activity that allows kids to not only play with a magnifying glass, but it shows kids how to make one too. So much discovering going on here!

Materials needed:

  • a plastic bucket (we used a large coffee container)
  • marker
  • knife and/or scissors
  • clear, plastic material (a dry-cleaners bag is best, but plastic wrap would work too!)
  • large rubber band
  • water
  • small objects

First, draw three large circles on your bucket or plastic container. They need to be big enough to get one’s hand in-and-out easily. Our coffee container had a funky handle part, so we just drew and cut a rectangle shape around it. Modify your circles however you need to to make it work!

 

Using your knife and/or scissors, cut the circles out. Try making smooth edges so no little hands get cut going in-and-out.

Next, lay the plastic material loosely over the bucket and secure it with the large rubber band. If you don’t have a rubber band big enough, you could always cut and tie a couple together to make it work.

 

Since water is involved, it’s best to do this activity outside, in the bath tub or in a water-safe area. We put a beach towel down on our kitchen floor and put our water lens inside a baking pan to catch any splashes…worked great!

Pour warm water onto the plastic material…as much as will fit without spilling over. And now your water lens is ready for play!

Have your kids take turns holding various objects underneath the “magnifying glass.” They can experiment by moving their hands up and down, and by adjusting the amount of water in the lens. So simple to make, but so much fun!

 

 

 

 

Make sure the water you use is warm…if you use cold water the lens will fog up quickly! We made that mistake for you! Ha!

L had a ball with this one today! Tomorrow morning we plan to venture outside and collect more flowers, sticks, snail shells, leaves, etc. to examine up close with our homemade magnifying glass! Where will this discovering activity take you? Enjoy!!!

Leaf Prints…Pillowcases and T-Shirts

Ever since we put up L’s “big girl bed” a couple months ago I’ve been looking for the perfect pillow sham. I finally decided, “Why not just make one!?” And that’s exactly what we did today! I love the outcome…it turned out even better than I imagined it would! The pillow cover will last for years and we can always look back on this perfect Autumn day. We followed it up by making some matching Fall shirts for the girls as well!

 

Pillow Cover

Materials needed:

  • pillowcase, ironed if needed
  • a few scraps of cardboard
  • paper towels
  • acrylic paints
  • brushes and palettes (we use old, plastic lids)
  • leaves

 

Before you start painting, prepare your area. You’ll need a piece of cardboard to paint the leaves on top of and a piece of cardboard to slide into the middle of the pillowcase, so no paint seeps through. If the cardboard inside the pillowcase is ridged, you may want to add an old, silicone cutting board or piece of card stock underneath as well. You wouldn’t want the ridges to effect the leaf prints.

Starting with the larger of your leaves, paint the underside of the leaf and then carefully press it onto the pillowcase. Repeat with different colors, different shades and different sizes until you’re happy with your final project. We started with various shades of orange and then added a few reds, yellows and greens. Likewise, we started with large leaves and ended with a few tiny ones.

 

 

 

 

T-Shirts

Materials needed:

  • t-shirts, ironed if needed
  • a few scraps of cardboard
  • paper towels
  • acrylic paints
  • brushes and palettes (we use old, plastic lids)
  • leaves

You will basically make leaf prints onto your t-shirt in a similar manner as with the pillowcase above. The only difference is that you’ll want smaller cardboard pieces to slide into the shirt and one really narrow piece to slide into the sleeve. As you can see, after printing leaves on the center of the shirt I added one tiny, falling leaf to the sleeve.

 

 

 

 

 

Cute, huh!? And easy! What else will you make leaf prints on? I think an Autumn table runner would be beautiful as well! There are so many possibilities! Enjoy!

The Buckeye Zoo (and Other Fall Seed Creations)

I just love this time of year! One of my favorite things to do since I was a kid and now with my own kids is collecting the Fall leaves, nuts, and seeds. L says she likes to be a “thing finder” like Pippi Longstocking on our nature walks. This year, as we’ve been foraging, we’ve also begun gluing some of our buckeyes and other nuts and seeds together into animals.

Materials needed:

  • buckeyes
  • acorns
  • helicopter seeds
  • whatever other nuts and seeds you can find
  • feathers
  • twigs
  • glue (I used a hot glue gun, but let L use wood glue.)
  • acrylic paint
  • sealant

Before you start gluing, it’s important to make sure that all your findings are bug-free and that they’re dry. Put a layer of tinfoil on a baking sheet or pan and spread your nuts and seeds out on top. With your oven set to 200 degrees, bake your acorns, walnuts and buckeyes for about 1.5 to 2 hours. Turn the seeds over about every half an hour to prevent burning. With some of the spiky or more delicate seeds, bake them at a lower temperature…around 180 degrees…for an hour or so.

After the seeds are baked and cooled, you can start gluing together your creatures. I prefer using a hot glue gun…it’s quick and holds the buckeyes and other seeds together nicely. I let L glue some of her own with some standard “wood glue” though. It takes longer to dry, but it’s much safer for a 2 year old to use on her own!

 

 

The elephant was the first member of our Buckeye Zoo…definitely L’s idea! She looooves elephants!

 

Here’s a little bunny rabbit…I think tomorrow I’ll make some flop-eared bunnies for a dear friend of mine. So simple, but so cute!

 

I thought this one was gonna be a porcupine or hedgehog, but L said it looked most like a sheep. I agree!

And I just love this bird. We’ll be making him/her a nest by gluing together twigs later this week.

 

While most of our creatures were complete after gluing, we chose to paint others…like L’s caterpillar and the turtle and dragonfly we made together.

 

 

What Buckeye creatures will you and your kids make this year? We’d love to see your creations shared here in the comment section…there are so many possibilities! Have fun collecting and creating!!!

DIY Autumn Leaf Bookmarks

We are so, so excited in Our Beautifully Messy House that Fall has finally arrived and with it new projects and crafts to do! Nature offers so many free materials this time of year…from brightly colored leaves to acorns and buckeyes of all different sizes, not to mention weird and crazy seed pods. These Autumn Leaf Bookmarks were just too perfect for me to do this week with the new addition of our Little Free Library at our house, as well as all the leaves starting to change and fall in our backyard!

Materials Needed:

  • empty cereal or cracker box
  • scissors
  • gold acrylic paint
  • brightly colored leaves
  • hot glue gun and glue
  • Mod Podge and brush

First, cut your cereal box cardboard into bookmark-shapes. I did some thin ones with square edges and a couple thicker ones with rounded edges…both turned out great!

After cutting your bookmarks, paint a couple layers of gold acrylic paint on each side. The paint job doesn’t have to be perfect since the leaves will cover up most of the cardboard.

Once the paint has dried completely, it’s time to glue on your leaves. First, prepare your leaves by cutting the stems off.

Start with one of your larger leaves, and apply the glue directly onto the bookmark. After you’ve pressed your leaf into the glue,  smooth it down as flat as possible, working from the center of the leaf out. And work quickly…hot glue dries super-fast!

Once the central part of your leaf is attached, apply small dabs of glue to the edges and tips of the underside of the leaf and continue to smooth it flat. Fold over-hanging tips around and glue to the opposite side. Continue layering and gluing leaves on both sides.

 

 

 

Once all the leaves are attached, examine the bookmark and try to remove any little pieces of hot glue that may be visible. Now paint one or two coats of Mod Podge on each side of the bookmark. The Mod Podge helps preserve the leaves and their bright colors. It also makes the bookmark a bit more durable!

Too easy, right? It makes such a cute, lil gift for a friend or neighbor! Check back for many more Fall crafts to come in the next couple months! Enjoy!

 

 

 

DIY Wind Chimes

I love finding new uses for old things and I’ll take any excuse to peruse an antique store, so making these wind chimes was the perfect project for L and me! Like most of our home decor projects, L couldn’t help with everything, but I let her help where she could…she painted all the keys and picked out all the buttons we used. Your wind chime doesn’t have to include everything ours does, but hopefully it inspires you to make one with things you do have around the house!

 

 

 Materials for Wind Chime #1:

  • antique cheese grater
  • old buttons
  • keys
  • an old prism
  • sturdy thread or cord
  • acrylic paint
  • glossy sealant spray

 Materials for Wind Chime #2:

  • antique, silver candy dish
  • old buttons
  • keys
  • an old prism
  • sturdy thread or cord
  • acrylic paint
  • glossy sealant spray

For Wind Chime #1, which we made for my younger brother, I painted an old cheese grater that I had found at an antique store. While I painted the cheese grater, L painted a bunch of old keys. Once the keys dried, we turned them over and painted the other side different colors. After both sides were painted and dried, I sprayed the keys and the cheese grater with a glossy sealant. It gives the items a more finished look and will help them stand up to the weather a little better too.

 

 

 

 

First, figure out how you’d like your wind chime to hang…for instance Wind Chime #1 was hung on a slight angle, so the painting was visible. Wind Chime #2 was an antique candy dish hung upside-down. Hang the wind chime between two chairs while you work on it. This makes fastening all your keys and buttons soooo much easier!

To assemble the wind chime, we first laid out all the materials we had on hand…buttons, keys, old thread spools, and prisms. From here we decided what we wanted the wind chime to look like and started piecing it all together. It’s a great opportunity to talk about patterns with your little ones!

After everything was strung-up and fastened the way we liked it, I put a spot of crazy-glue on each knot and cut the extra strings. Now for the fun part…ready to wrap it up and give it away as a gift or find the perfect spot for your wind chime to hang! What will your wind chime look like?