Mixed-media Fall Art

We have some glorious October weather in Virginia this week…cool mornings, sunny days, and brilliant leaves falling from our trees! L’s been painting outside these days, in a world of October color! Yesterday she made a beautiful fall tree using acrylics, melted crayons, and a sprinkle of “leaf glitter” (tiny pieces of actually leaves). The outcome is beautiful!!! I made a similar piece last year that I also adore…the process is as much fun as the piece of art itself!

2015-10-21 06.43.21

Materials needed:

  • canvas (you could do this on cardboard too!)
  • acrylic paints (blues, white, brown)
  • crayons (oranges, yellows, and red)
  • knife and cutting board
  • oven

*A tip when buying crayons for this project…when you’re looking for orange crayons, buy a box of 24 crayons. The larger boxes contain more crayons, but not any more orange and yellows!!! We always seem to run out of orange crayons this time of year!

First, have your child paint their canvas blue. We like to use some darker and some lighter blues, mixing them all together.

DSC_0494

DSC_0496

Next, have them paint a few white, fluffy clouds.

DSC_0500

As the sky is drying, sit back and look at the trees with your child. Point out how the trunk is usually straight and thick. As you move up the tree, the branches get smaller and smaller, and they get more squiggly!

DSC_0498

As you continue to discuss trees and their features, lay out a few various-sized paintbrushes. Have your child put them in order from biggest to smallest. Now they know which paintbrush to use for their tree’s trunk and all its branches!

DSC_0504

Time to paint the tree!

DSC_0508

DSC_0516

DSC_0522

The next step is a little “out of the box,” but that’s what makes it so great! Have your child pick out which crayons are the colors of the fall leaves before them. Using a sharp knife and a cutting board, remove the paper off the crayons and chop the crayons up into tiny pieces. I think we used half a lime-green crayon, one yellow, three or four oranges, and one red crayon.

DSC_0523

Lay the painting down on a flat surface and have your little one sprinkle the crayon shavings all over the trees branches. L also crumbled up an actual leaf from the yard and sprinkled some of it among the crayon pieces. It’s a minor detail, but it’s my favorite. I’ll always remember this day and where L made her Fall Tree.

DSC_0529

DSC_0538

DSC_0541

Once the crayon shavings are all dispersed, put your painting into the oven at 200 degrees for about 3-5 minutes. Watch the pieces as they melt. (Our painting was too big to fit in the oven this time, so I carefully held it under the broilers with the oven set on broil. I did one end, then turned it around and did the opposite.) When you remove the artwork from the oven, be careful to hold it flat and steady…until the crayon wax hardens, the wax will drip if it is tilted at all.

DSC_0542

Isn’t the outcome gorgeous? It’s perfectly imperfect…just like a fall leaf.

DSC_0544

If you think this is just a craft for kids, you’re wrong…you can totally do this as well! “Mixed-media Fall Art” is fun for anyone and everyone! Enjoy!!!

IMG_5687

IMG_5689

IMG_5691

DIY Fairy Door…Gnome Door…

In our garden the fairies and gnomes live amongst each other. Their village spreads around the yard with lil houses, patios and ponds hidden beneath the flowers. Throughout the year, L and I like to collect and make things to add to our garden…this morning we made a lil fairy door.

Materials needed:

  • sticks
  • florist wire
  • a button

 

First, have your kids collect some sticks and twigs around the yard. Sort through the sticks, finding ones that are particularly straight. Lay these sticks side-by-side, getting an idea of what your door will look like.

 

 

Next, cut two pieces of florist wire about 2-ft long each. Fold them in half.

 

 

Take the first stick you have laid out for the door and place it in the middle of one of the wires. Wrap the wire around the stick, about an inch from the bottom, and twist the wire once to secure it.

 

 

Do the same with the second wire about the an inch from the top of the stick. Continue adding sticks, one-by-one, wrapping and twisting the wires as you go.

When all the sticks are connected, hold the door in two hands and very gently squeeze the sticks together.

 

 

Cut the end of the wire, leaving about half an inch, and fold back the extra.

 

 

Next, have your child select a button for a door knob. L chose this cute lil heart button…probably not the one I would have chosen, but it was perfect for a fairy door! (Kids just know when it comes to these things.)

 

 

Thread the button onto a 4-inch piece of wire, twisting the wire a bit to secure it. Then, deciding where you’d like the door knob to be, wrap and twist the wire around one or two of the sticks.

 

 

To ensure that the button won’t slide down the door, you can thread the excess wire up and over the wire that holds the sticks in place as well.

 

 

Now the fun part…find a little piece of wall, fence, or a tree trunk to prop the door up against! Add some buttons, pennies, or broken tile pieces for lil fairy stepping stones… Adorable!

 

 

This project was so quick and easy, I think we’ll make another to sneak into our neighbor’s garden. He’s got the perfect tree for a fairy or gnome door…

 

Wizard Wands…Fairy Wands…Magical Wands

This is such a simple craft to do and, paired with a wizard cape or hat, it makes for a fun gift too! I first made these for my nephew’s birthday party…and they were a big hit! Depending on your kid’s age, he or she can help with some and maybe even all of the steps.

 

 

Materials:

  • sticks from the yard
  • acrylic paint
  • glitter paint
  • a small marble
  • glitter hot-glue-gun glue and glue gun

 


Collect sticks! If you don’t have good ones in your yard, go on a nature walk around town collecting some. The more twisty-turny they are the better! Make sure they are strong ones and won’t break easily. Brush sticks off, gently removing any loose bark.

 

 

Paint! Most of my acrylics are not labeled “non-toxic” and they are permanent, so I did this step on my own. Sometimes I let L paint with acrylics, but I cover the kitchen counters and nearby appliances with garbage bags, cover the chair she stands on with a towel and make sure she’s wearing her smock. You be the judge on this one! After the paint dries, apply another coat if needed and then paint with the glitter paint. You could stop here if you want and have a pretty awesome wand…I like to add the marble on top though to make it a little safer!

 

Attach marble! Find a marble that’s the right size and color you like. Old marbles are another great thing to find at antique stores…whenever we see a jar for a good price, we snatch em up. Using the hot glue gun, apply a little dab of glue at the tip of the stick and quickly push a marble in place. To secure the marble, apply more glue around the base and then make a little dripping effect down the wand. Plan on using about one whole glue stick per wand. And that’s it!

 

 

 

Too easy, right? It’s fun watching your kid’s imagination soar while playing with their wand. L likes to think she can make the leaves of a tree dance or birds fly with hers. I always remind her of two rules though… #1: No hitting anything or anyone, and #2: No running with the wand. If you make a wand, please share your pics with us! I’d love to see what else you add…ribbons, jewels, etc.