DIY – Page 9 – Our Beautifully Messy House

Homemade Paper and Seed Paper

August 8, 2014September 29, 2015 Porter Leave a comment

Last night, while cleaning up from dinner, I told L not to throw away her pudding cup because it can be recycled. She replied, “What’s recycle? What’s it mean?” So as I was doing my best to explain to a 2-year-old how plastics are melted down and made into new containers, I remembered how I used to make paper as a kid…it’s the perfect activity to teach kids of any age how things are recycled! I lost my paper-making kit years ago, but it didn’t take long to locate and piece together the materials needed for homemade paper. I love this activity because your kids can help with each of the steps, keeping them busy and entertained the whole way through!

Materials needed:

old paper
water
blender
2 small window screens
felt (or thin cloth like a cloth diaper)
sponges
plastic tub or wide container
seeds (optional)

First, dig through the recycling basket for colorful paper. (I always save colored-on pieces of construction paper for projects like this!) Have your kids help you tear it up into 2-inch pieces and throw it all into a large bowl.

Add some water to the bowl, covering all the paper pieces, and let it soak thoroughly for a few minutes. Your kids can now reach in the bowl to see how the wet paper feels compared to the dry.

Next, scoop and dump the paper and water into your blender. There’s no exact amount of water needed since it’ll all be squeezed out in the end. Blend the mixture for about a minute. The pulp should resemble the consistency of oatmeal.

Now for the fun, messy part!!! Lay one of the screens over the plastic tub or container. (You could use your sink, but it’s easier for kids if the project is done on the floor!)

Next, dump the paper pulp mixture out on top of the screen. Let your kids help you spread it around gently.

Then lay a large piece of felt on top of the mixture and next, the second window screen.

Using sponges press down on the felt, squeezing most of the water out. We started in the middle of the felt and worked our way out, pressing the paper underneath nice and flat.

Next, take off the top screen and, placing one hand on top of the felt, quickly flip the other over. Remove the screen and leave the paper on the felt to dry. I did this last step outside on our picnic table so the paper could dry in the sun and summer heat. It takes about a day to dry on its own. When I was a kid, doing a similar paper-making project, the paper and felt pieces were much smaller and I’d pop it in the microwave to dry. The paper would curl a little bit sometimes, but it was quick and easy.

Here’s our finished paper! It doesn’t look like your typical paper, but it is beautiful with all the bright yellows, reds and oranges mixed in! It’ll be perfect to paint on later in the day!

Making Seed Paper:
To make seed paper, add a handful of flower seeds to the pulp before squeezing all the water out. After the paper dries, you can cut it up into squares and gift it to friends. They can plant the paper strips in soil in the Spring, water and wait for their flowers to grow! We used our leftover, perennial Balloon Flower seeds…they’re easy to grow and look beautiful anywhere!

Other Ideas:

Before squeezing the water out of the paper-pulp mixture, add some flower petals to the pulp for a fresh and colorful look!
After squeezing the water out and removing the screens, use cookie cutters to carefully cut the paper into shapes. After they dry, you can punch a hole to hang the paper shapes and make ornaments! We may do this around the holidays, using holiday-colored paper.
You can also add glitter to the paper pulp, before squeezing the water out, to give your paper a little sparkle!

Have fun and get messy! Your kids will love you for it!!!

DIY Tin Can Bird Feeder

August 6, 2014September 29, 2015 Porter Leave a comment

I think what I love most about the Tin Can Bird Feeder is that you’re essentially making something from nothing! It’s also such a fun way to teach kids how to reuse and recycle! We just made the bird feeder on a whimsy for our own backyard, but it would make a terrific gift too.

Materials needed:

tin can and its lid
pliers
hot glue gun and glue
sticks
string
a few small rocks

First, make sure your can has been thoroughly cleaned and remove the paper label.

Next, being careful not to cut yourself, fold the lid in half using your pliers. Our lid was one of the pull-top ones, which made it a little tricky, but we were still able to make it work!

Now, using the hot glue gun, put a little bit of glue around half of the rim of the can and set the lid inside. Try your best to hide the glue, so it’s not so visible from the outside.

While you’re folding and gluing the top, go ahead and send the little ones off to find sticks in the backyard.

Find one or two thicker, sturdier sticks and glue them to the bottom of the bird feeder…this is where the birds can perch while they snack.

Now, go around the can gluing sticks side-by-side until the entire can has been covered. We broke the sticks so they were all roughly the same length, but by no means perfect. If one stick is curved and leaves a substantial gap, go ahead and glue a small stick in to fill the hole.

On the bottom of the can, glue a few rocks in place…these probably won’t be seen, but will help balance out the bird feeder so it doesn’t tip too far forward.

Lastly, tie a string around the bird feeder and fill with bird seed. Hang it up where you and the kids can see it from a window…maybe on a nearby branch or off of your porch. Now, sit back and wait for the birds!

We decorated our bird feeder with sticks from the yard, but you can certainly get creative and mix things up a bit. Your kids can paint the tin can, wrap string around the can, or glue buttons on it…anything you all are inspired to do to make it unique!

DIY Fairy Door…Gnome Door…

July 29, 2014September 29, 2015 Porter Leave a comment

In our garden the fairies and gnomes live amongst each other. Their village spreads around the yard with lil houses, patios and ponds hidden beneath the flowers. Throughout the year, L and I like to collect and make things to add to our garden…this morning we made a lil fairy door.

Materials needed:

sticks
florist wire
a button

First, have your kids collect some sticks and twigs around the yard. Sort through the sticks, finding ones that are particularly straight. Lay these sticks side-by-side, getting an idea of what your door will look like.

Next, cut two pieces of florist wire about 2-ft long each. Fold them in half.

Take the first stick you have laid out for the door and place it in the middle of one of the wires. Wrap the wire around the stick, about an inch from the bottom, and twist the wire once to secure it.

Do the same with the second wire about the an inch from the top of the stick. Continue adding sticks, one-by-one, wrapping and twisting the wires as you go.

When all the sticks are connected, hold the door in two hands and very gently squeeze the sticks together.

Cut the end of the wire, leaving about half an inch, and fold back the extra.

Next, have your child select a button for a door knob. L chose this cute lil heart button…probably not the one I would have chosen, but it was perfect for a fairy door! (Kids just know when it comes to these things.)

Thread the button onto a 4-inch piece of wire, twisting the wire a bit to secure it. Then, deciding where you’d like the door knob to be, wrap and twist the wire around one or two of the sticks.

To ensure that the button won’t slide down the door, you can thread the excess wire up and over the wire that holds the sticks in place as well.

Now the fun part…find a little piece of wall, fence, or a tree trunk to prop the door up against! Add some buttons, pennies, or broken tile pieces for lil fairy stepping stones… Adorable!

This project was so quick and easy, I think we’ll make another to sneak into our neighbor’s garden. He’s got the perfect tree for a fairy or gnome door…

DIY Sock Bunny Rabbit

July 21, 2014September 29, 2015 Porter Leave a comment

This project was inspired by a dear friend Libby, who left this world way too early in life. When I was 10 years old I was diagnosed with type I diabetes. As my doctor came to the hospital that evening to diagnose and take care of me, his wife, Libby, got out her sewing kit. She stayed up late that night making me a precious bunny rabbit that I still have to this day.

So when one of my best friends’ babies, my godchild, was in the hospital for surgery last week and ended up staying much longer than expected, my first thought was of Libby and the bunny. I knew I had to make one.

Materials needed:

one pair of socks (regular or knee high)
needle and thread
stuffing material
embroidery floss and embroidery needle
buttons (optional for children 3+)

First, take one sock and open it up so the heel is facing you. Lay it flat. The heel of the sock will be the bunny’s face.

Then, make a cut in the middle of the toe of the sock, cutting towards the heel. This will be the bunny’s ears. Don’t cut all the way to the heel though, remember the heel becomes the face. Next, make a cut from the opposite end of the sock for the bunny’s legs. Again, don’t cut all the way up to the heel…this time you need to leave room for a body too.

Turn the sock inside-out. Starting at the tip of an ear, stitch down one ear and up the other. Next, sew the legs in a similar fashion, but this time leave about a 2-inch opening.

Turn the sock right-side-out. Through the 2-inch opening, carefully stuff the bunny’s ears, body and legs. Sew the opening closed.

Now take the other sock and cut off the toe, close to the heel. Lay this part flat, like you did the first sock, and cut it in half. These will be the arms.

Turn one sock piece inside-out and, starting from the tip, stitch the side closed. Turn it right-side-out again and fill it with stuffing.

Next, fold the open edge inwards and pinch it together. Sew the arm closed, attaching it to the body at the same time. Repeat with the other arm.

Your bunny’s adorable already, isn’t it? But, it still needs a face! Using embroidery floss, stitch on little eyes or attach buttons (if the child receiving the bunny is 3 years old or older) and sew a lil nose. All done!

As you can see from the picture below, using knee socks gives you a tall and skinny bunny and using slightly smaller socks results in an adorable, baby bunny rabbit. Now to deliver them to my godchild and her 3 yr old sister…I can’t wait to see those happy faces!

“Making something is one way to say, ‘I love you.'” -Daniel Tiger

DIY Capes…Wizard Capes…Superhero Capes

July 19, 2014September 29, 2015 Porter Leave a comment

Before I move on to any other posts, I thought I ought to share how to make a cape to go with your magical wand! Now this can be a wizard cape, a superhero cape, a cape for a child or an adult.

Materials needed:

jersey knit fabric
ribbon (about 5 ft, depending on the size of the wizard)
thread and needle
sewing pins

First, you must determine whether you want a short or a long cape…both have equal flying abilities. Lay the fabric out on a flat surface and cut out the cape, a little wider at the bottom than the top. If you like, you can measure and draw the cape first…I just eyeballed it. Using knit fabric makes this a super easy craft because the edges will not fray and there is no need to hem the sides.

Next, lay the ribbon out along the top edge of the cape and pin it in place. If you know how to use a sewing machine, this next step should be quick and easy…if you want to do it by hand it is also fairly quick and easy. All you need is a simple, straight stitch across the top of the ribbon and one along the bottom.

Your cape is done! Too easy, right? If you want to add some embellishments…some beads or buttons…you can sew them on as well. To make my nephew’s cape extra wizardly for his birthday I sewed an owl in the middle. (See above, top photo.)

I like to avoid tying anything around a child’s neck, so to attach the cape put the ribbon over the shoulders, then back under the arms and tie it in the back. Off to flying school!

Wizard Wands…Fairy Wands…Magical Wands

July 16, 2014September 29, 2015 Porter Leave a comment

This is such a simple craft to do and, paired with a wizard cape or hat, it makes for a fun gift too! I first made these for my nephew’s birthday party…and they were a big hit! Depending on your kid’s age, he or she can help with some and maybe even all of the steps.

Materials:

sticks from the yard
acrylic paint
glitter paint
a small marble
glitter hot-glue-gun glue and glue gun

Collect sticks! If you don’t have good ones in your yard, go on a nature walk around town collecting some. The more twisty-turny they are the better! Make sure they are strong ones and won’t break easily. Brush sticks off, gently removing any loose bark.

Paint! Most of my acrylics are not labeled “non-toxic” and they are permanent, so I did this step on my own. Sometimes I let L paint with acrylics, but I cover the kitchen counters and nearby appliances with garbage bags, cover the chair she stands on with a towel and make sure she’s wearing her smock. You be the judge on this one! After the paint dries, apply another coat if needed and then paint with the glitter paint. You could stop here if you want and have a pretty awesome wand…I like to add the marble on top though to make it a little safer!

Attach marble! Find a marble that’s the right size and color you like. Old marbles are another great thing to find at antique stores…whenever we see a jar for a good price, we snatch em up. Using the hot glue gun, apply a little dab of glue at the tip of the stick and quickly push a marble in place. To secure the marble, apply more glue around the base and then make a little dripping effect down the wand. Plan on using about one whole glue stick per wand. And that’s it!

Too easy, right? It’s fun watching your kid’s imagination soar while playing with their wand. L likes to think she can make the leaves of a tree dance or birds fly with hers. I always remind her of two rules though… #1: No hitting anything or anyone, and #2: No running with the wand. If you make a wand, please share your pics with us! I’d love to see what else you add…ribbons, jewels, etc.

DIY No-Sew Teepee

July 11, 2014September 29, 2015 Porter Leave a comment

What kid (or adult) doesn’t like to play in a fort, tent or secret hideaway?! This teepee was so incredibly easy to make, I was able to construct it in about 5 minutes, just after the sun came up and before my girls awoke. Breakfast in a teepee anyone?

What you need:

6 x 72 in. bamboo stakes ($3-$4 for a pack of 6 at Home Depot)
twine
10-12 clothes pins
a large bed sheet (I used a king-sized one, queen would probably work too)

First, arrange the stakes in a circle, pushing them about an inch or two into the ground. Leave one opening a little wider than the others, making room for the door.

Second, tie your twine in a knot around one bamboo stake. Gather the stakes at the top, one-by-one wrapping the twine in-and-out and around. (It’s much harder to explain than it is to actually do!) After the last stake has been gathered and wrapped, tie a bow so it is easy to undo when your teepee is ready to come down.

Next, wrap the sheet around the teepee frame and clip a clothespin in the middle to secure it at the top.

Then, starting at the front and the top, clip the sheet to the stakes using the clothespins. Make sure you keep enough fabric up front for a “door.” As you clip the tops of the stakes and the bottoms, smooth out the sheet and pull it taut. Tuck any excess fabric under at the bottom.

And there you have it…a teepee in under $10 and under 10 minutes! Not only did L eat breakfast in her teepee, she read books, colored, and played with her dolls for HOURS! The teepee’s been going up and down for a couple weeks now…it’s about time to put it away and out of sight for a couple months so it doesn’t lose its luster. Perhaps we’ll bring it out again this Autumn for a special lunch among the colorful falling leaves!