Category: Recycling crafts

Clothespin Butterflies

Porter Leave a comment

These clothespin butterflies are fun to make and can be clipped just about anywhere! L and I started this craft on a whim a couple weeks ago, we were trying to make butterflies with things we already had. Hopefully you have all the materials hiding around your house too! You could use paint or markers to color the clothespins. Using markers, the butterflies could be finished in one morning. We chose to paint ours…L loves to paint and I like when projects can be stretched out, keeping us busy for a few days.

Materials needed:

  • clothespins
  • paint or markers
  • pipe cleaners
  • beads
  • hot glue gun and glue

First, paint the clothespins. We painted one side, let them dry, then painted the other. I helped with the touch-ups…filling in any little spots that were missed. Let the kids have fun with it! L was happy painting hers all sorts of colors…there’s no right or wrong way.

 

Next, choose the color pipe cleaners you want to use for wings and the color beads. We used three colors of beads for the wings. This was a great learning activity to teach little ones about patterns! L strung the beads on the pipe cleaners, repeating our 3-bead pattern 4 times for each wing.

 

 

Spread the beads out a little bit, so the color of the pipe-cleaner can be seen. Next, loop one end of the pipe cleaner around to the middle of the pipe cleaner and wrap it once or twice, leaving about half an inch of the end sticking out. Repeat with the other side of the pipe cleaner, forming a figure-8 butterfly wing shape. Twist both half-inch ends together. (This step is much easier to see in the pictures than to explain!) Repeat for the second wing.

 

 

 

 

To make the butterfly’s antennas, cut a pipe cleaner in half. Then, bend that piece in half. Put a bead on each end of the antenna and curl it down a bit.

 

 

After you’ve shaped both butterfly wings and the antennas, it’s time to glue them to the clothespin. Using the hot glue gun, put a little bit of glue on the inside ridge of the clip and quickly press the middle of the antennas in place.

 

 

Next, put a bit of glue inside the wire coil and push one of the wings in. Repeat the same on the other side, only put the glue above the wire coil and slide the wing in place.

 

 

Cute, right? These would be beautiful hanging in a window with the sun lighting-up the beads! We’re making something special for WB’s room with ours…I can’t wait to show you next week! Enjoy!

DIY Melted Crayon Art with Variations

Porter Leave a comment

This was the perfect “rainy day craft” for today…fun for me and for L! I’m so excited about these melted crayon creations, I can’t wait to make more! Let’s jump right in…

 

Materials needed:

  • white canvas
  • crayons
  • hot glue gun and glue
  • cardboard box
  • hair blowdryer

Although there’s definitely some unpredictability in this project, you first need to plan it out a bit. Start with picking out your colors.

 

After deciding where your crayons will go, use the hot glue gun to attach them to the canvas.

 

 

Next, place the canvas in a cardboard box. The box will keep your work area clean, catching the crayon splatter.

Prop the box up against a chair, table, or wall. Make sure the crayons are facing down (if you want a dripping effect) and that the box and canvas are on a little bit of an incline.

 

Next for the fun part, use the hair dryer to melt the crayons and blow the wax around. I let L do most of the rainbow picture. Turned out pretty awesome, huh!?

 

 

Now, display your work in whichever direction you please. I think a ribbon pinned or glued around the outside edges of the canvas would give it a nice, finished look!

Variations:

Wildflowers

To make the wildflower piece, I used mostly greens and browns. After I was done melting the crayons and the wax had time to cool down, I used the hot glue gun to attach flowers. Do this step carefully, so no glue shows! It works best to glue the flowers on spots without any wax.

 

 

 

 

 

Wild Splatter

I experimented with this one a bit, trying to plan for some future creations. I kept the box flat to the ground and used broken crayon pieces. To hold the crayons in place while melting them, I used a fork and smudged them around a bit. The outcome was a little funky…next time I’ll use smaller crayon pieces and maybe some crayon shavings instead.

 

 

 

 

 

I’m hoping to make a vibrant, Autumn tree next! I’ll be sure to update the blog and add those pictures as well, so check back soon!!! What “melted crayon art” will you make???

 

DIY Rustic Spinning Stars

Porter Leave a comment

I love these Rustic Spinning Stars. When I first saw something similar here on the “happy hooligans” blog I just knew we had to make them! They’re fun to make with the kids and are beautiful hanging inside or outside. We have ours spinning on our front porch, while my dad hung his (which we gave him for Father’s Day) in their kitchen. I think the stars would be really fun hanging, spinning from the branches of a big tree too!

 

 

Materials needed:

  • sticks
  • glue gun and glue
  • white acrylic paint and brushes
  • colored ribbon scraps, string, raffia
  • florist wire

First, have your little ones collect sticks. You can make big stars with big sticks or use little twigs, like we did, to make little 3 to 5-inch stars.

Use the hot glue gun to glue five sticks together into the shape of a star. The stars don’t all have to be the same size and they certainly don’t have to be perfect…any imperfections give your stars more character! Don’t worry about the glue showing either, in the next step the paint will cover it up.

Next, have your kids help you paint each star with white acrylic paint. This is a great painting project for little ones, since any missed spots give the stars their rustic appearance.

 

After the paint dries, tie one end of your ribbon to the center of the star and wrap it around. Again, no need to be perfect here…another great task for your kids to help you do! After the star is wrapped, tie the end in a knot around one of the star’s arms.

You can attach the stars to each other with string or wire. We used green florist wire, which is weather resistant and sturdy. If you link two pieces of wire together, between each star, the stars will spin a little more than if you use only one wire. We tried both ways…both did the job and look great, so it’s up to you!

Now for the fun part, find the perfect spot to hang your Rustic Spinning Stars! Enjoy!

DIY Cardboard Tube Bracelets and Watches

Porter Leave a comment

This is one of those things that I threw together while fixing breakfast one morning. L has a little craft corner, just a chair pulled up to the kitchen counter, next to where we cook and prep food. She was just looking for something to get into on this particular morning, so I pulled some tubes out of our recycling basket, cut them in half and gave her some markers. L doesn’t use markers very often, so when she does get to use them for a craft she is THRILLED and works for at least 30 min to an hour!

Materials needed:

  • old paper towel or toilet paper tubes
  • markers (or paint)
  • scissors

Other optional embellishments:

  • jewels, sequins
  • poof-balls
  • buttons
  • macaroni noodles
  • string
  • duct tape
  • hot glue gun and glue

 

 

 The first step, is to make one cut up the side of the tube. Then cut the tube in half or into pieces, depending on how wide you want the bracelet.

Next, have your kids color the tubes. As you can see here, it was easiest for L to color hers while it was curled around a bottle of paint. A banana or thin rolling pin would work great too!

After the tubes are colored you can glue on any embellishments that you have on hand. L is only 2, so her coloring is basically scribbling…the poof-balls and jewels give her scribbling bracelets a little more bling.

 

Depending on the brand and type of cardboard tube you are using, you can always make the bracelets more secure with some snazzy duct tape too! Our toilet paper rolls were plenty sturdy, but paper towel rolls were thinner and weaker and needed a little support!

 

And don’t think this craft is just for girls! Guys can certainly wear bracelets! What Dad wouldn’t want a cardboard tube watch? It’d make a fun lil addition to a Father’s Day gift or birthday gift.

 

 

Have fun making something out of nothing!

Play Dough Funny Faces w/ DIY Outlet Covers

Porter Leave a comment

When I saw a variation of this craft years ago, I stored it away in the back of my mind, just waiting for L to be old enough to make and play with these! The outlet covers I saw were made using Sharpie Markers, but I love the color we brought to ours with paint! The outlet-cover funny faces are as much fun to make as they are to play with! L and I spent one day painting the outlet covers, let them dry overnight, then the next day, we were able to glue on the googlie eyes and stick them in our play dough! So silly and so much fun!

 

Materials Needed:

  • outlet covers
  • paint (acrylic and/or puffy paint)
  • googlie eyes
  • jewels (optional)
  • hot glue gun and glue
  • your favorite play dough
  • egg cartons (optional)

 

The first thing I did, preparing our work station, was to cut off the center tips of an egg carton. I then put an outlet cover in each opening so L could paint them with ease.

 

Then, paint away! I tried to paint mouths and noses on the outlet covers, while I let L paint hers however she pleased. I figured the ones she painted could be used to glue on the eyes and jewels later on.

 

 

After the glue dries, you can go over some with puffy paint too! I thought it was a fun effect for big, puffy lips!

Using a hot glue gun, attach some googlie eyes and jewels to a few of the other outlet covers.

 

Now it’s time to play! Just push the outlet covers into your favorite play dough…the funny face possibilities are endless!

 

 

 

 

 

I love how the play dough doesn’t stick to the outlet covers, rather it just falls off, making clean-up a breeze! Please share pictures of your funny faces…we’d love to see them! Enjoy!

Bubble Blobs and Bubble Worms

Porter Leave a comment

Here is a super-fun activity made with materials you already have! L and I started making bubble blobs after breakfast this morning and we were still making them in the shower tonight! (I may or may not have bribed her into the shower with her bubble blob blower.) It’s definitely a good summer activity, but there’s no reason why it can’t be done in the bathtub on a rainy, cold day.

 

 

 

Materials needed:

  • plastic drink bottle
  • old sock (Thick socks work best!)
  • rubber band
  • dish soap
  • food coloring (optional)
  • a small bowl
  • scissors

 

 

First, cut the bottom of the plastic bottle off and unscrew the lid.

 

 

Turn the sock inside out (so the fluffier side is outside), and pull it over the bottom of the bottle. Secure it in place with a rubber band.

 

 

Next, put some dish soap in a small bowl with a little bit of water. If you want your bubble blobs and worms to be colored, add a few drops of food coloring too!

 

 

Now for the fun part…put the newly-made, bubble blob blower in the dish soap, then blow through the bottle top!

 

 

 

Instruct your kids to blow as if they’re blowing up a balloon and not to suck in!!! L made that mistake once and got a mouthful of bubbles. Ick!

 

 

 

 

 

It’s fun to see who can make the longest bubble worm! 🙂 What other bubble inventions have you made? Please share in the comments section below!

 

Imagination Box!

Porter Leave a comment

I don’t know about you, but our kids always seem to have too much stuff….too many stuffed animals, too many dolls, too many plastic play sets, too many puzzles, etc. When L is going to a birthday party, I hate to buy a toy that her friend will play with for 5 minutes and then toss to the side. Homemade gifts are truly the best, most heart-felt to give and I love making them, but I just don’t have the time some days. The IMAGINATION BOX is my gift-giving solution!!! It is quick and easy to put together and kids of all ages LOVE it! The Imagination Box makes for a fun birthday gift, as well as a perfect “Get Well Soon” gift, plus it guarantees hours of entertainment!

“So, what do I put in the box?” you ask. Anything and everything!

Paper plates and cups, brown paper bags, construction paper, crepe paper, straws…

 

Cotton balls, clothes pins, colored craft sticks, paper clips, sponges, markers, googlie eyes…

 

Buttons, rubber bands, glue, beads, shoe laces, pipe cleaners…

 

Egg cartons, kid scissors, mini-staplers, felt squares, a few sandwich bags (for lil pieces with opened packaging)…

 

Just about anything that will fit in the Imagination Box, that kids can use to create art, works! I usually go to the Dollar Store, walking up and down every aisle, and look for items with crafting potential. It certainly looks like a lot pictured here, but the box can be filled with less than 25 dollars!

 

Last, but not least, you need a cardboard box to put everything in. Try to leave the box mostly undecorated, so the child receiving the gift can use it too! The box itself will make a perfect rocketship, firetruck, castle, table, bed, gnome house, etc.

 

When putting together an Imagination Box, you need to consider the child’s age. It’s best to put things in the box that the child receiving it can create with independently and safely. After all, the box is designed to keep kids busy creating (so mom and dad can cook dinner in peace)! For instance, if you’re making an Imagination Box for a 2 yr old, you may not want to include scissors or a stapler, but an 8 year old would have no problem with them. Always make sure you give parents a heads-up of anything that’s questionable.

Some ideas to get kids started…

  • make a little town or fairy village using paper bags
  • paper plate masks
  • pipe cleaner bracelets, necklaces, glasses
  • puppets
  • robots
  • make pretend food
  • cotton balls for clouds
  • clothespins to make people
  • egg carton flowers
  • egg carton caterpillar

Get messy and have fun!!! Let the kids’ imaginations soar!

Homemade Paper and Seed Paper

Porter Leave a comment

Last night, while cleaning up from dinner, I told L not to throw away her pudding cup because it can be recycled. She replied, “What’s recycle? What’s it mean?” So as I was doing my best to explain to a 2-year-old how plastics are melted down and made into new containers, I remembered how I used to make paper as a kid…it’s the perfect activity to teach kids of any age how things are recycled! I lost my paper-making kit years ago, but it didn’t take long to locate and piece together the materials needed for homemade paper. I love this activity because your kids can help with each of the steps, keeping them busy and entertained the whole way through!




Materials needed:

  • old paper
  • water
  • blender
  • 2 small window screens
  • felt (or thin cloth like a cloth diaper)
  • sponges
  • plastic tub or wide container
  • seeds (optional)

 

 

First, dig through the recycling basket for colorful paper. (I always save colored-on pieces of construction paper for projects like this!) Have your kids help you tear it up into 2-inch pieces and throw it all into a large bowl.

 

 

Add some water to the bowl, covering all the paper pieces, and let it soak thoroughly for a few minutes. Your kids can now reach in the bowl to see how the wet paper feels compared to the dry.

 

 

Next, scoop and dump the paper and water into your blender. There’s no exact amount of water needed since it’ll all be squeezed out in the end. Blend the mixture for about a minute. The pulp should resemble the consistency of oatmeal.

 

Now for the fun, messy part!!! Lay one of the screens over the plastic tub or container. (You could use your sink, but it’s easier for kids if the project is done on the floor!)

 

 

Next, dump the paper pulp mixture out on top of the screen. Let your kids help you spread it around gently.

 

 

Then lay a large piece of felt on top of the mixture and next, the second window screen.

 

 

Using sponges press down on the felt, squeezing most of the water out. We started in the middle of the felt and worked our way out, pressing the paper underneath nice and flat.

 

 

Next, take off the top screen and, placing one hand on top of the felt, quickly flip the other over. Remove the screen and leave the paper on the felt to dry. I did this last step outside on our picnic table so the paper could dry in the sun and summer heat. It takes about a day to dry on its own. When I was a kid, doing a similar paper-making project, the paper and felt pieces were much smaller and I’d pop it in the microwave to dry. The paper would curl a little bit sometimes, but it was quick and easy.

 

 

 

Here’s our finished paper! It doesn’t look like your typical paper, but it is beautiful with all the bright yellows, reds and oranges mixed in! It’ll be perfect to paint on later in the day!

 

Making Seed Paper: 
To make seed paper, add a handful of flower seeds to the pulp before squeezing all the water out. After the paper dries, you can cut it up into squares and gift it to friends. They can plant the paper strips in soil in the Spring, water and wait for their flowers to grow! We used our leftover, perennial Balloon Flower seeds…they’re easy to grow and look beautiful anywhere!

 

 

Other Ideas:

  • Before squeezing the water out of the paper-pulp mixture, add some flower petals to the pulp for a fresh and colorful look!
  • After squeezing the water out and removing the screens, use cookie cutters to carefully cut the paper into shapes. After they dry, you can punch a hole to hang the paper shapes and make ornaments! We may do this around the holidays, using holiday-colored paper.
  • You can also add glitter to the paper pulp, before squeezing the water out, to give your paper a little sparkle!

 

Have fun and get messy! Your kids will love you for it!!!

DIY Tin Can Bird Feeder

Porter Leave a comment

I think what I love most about the Tin Can Bird Feeder is that you’re essentially making something from nothing! It’s also such a fun way to teach kids how to reuse and recycle! We just made the bird feeder on a whimsy for our own backyard, but it would make a terrific gift too.

 

 

Materials needed:

  • tin can and its lid
  • pliers
  • hot glue gun and glue
  • sticks
  • string
  • a few small rocks

 

First, make sure your can has been thoroughly cleaned and remove the paper label.

 

 

 

Next, being careful not to cut yourself, fold the lid in half using your pliers. Our lid was one of the pull-top ones, which made it a little tricky, but we were still able to make it work!

 

 

 

Now, using the hot glue gun, put a little bit of glue around half of the rim of the can and set the lid inside. Try your best to hide the glue, so it’s not so visible from the outside.

 

 

While you’re folding and gluing the top, go ahead and send the little ones off to find sticks in the backyard.

 

 

Find one or two thicker, sturdier sticks and glue them to the bottom of the bird feeder…this is where the birds can perch while they snack.

 

 

Now, go around the can gluing sticks side-by-side until the entire can has been covered. We broke the sticks so they were all roughly the same length, but by no means perfect. If one stick is curved and leaves a substantial gap, go ahead and glue a small stick in to fill the hole.

 

 

On the bottom of the can, glue a few rocks in place…these probably won’t be seen, but will help balance out the bird feeder so it doesn’t tip too far forward.

 

 

Lastly, tie a string around the bird feeder and fill with bird seed. Hang it up where you and the kids can see it from a window…maybe on a nearby branch or off of your porch. Now, sit back and wait for the birds!

 

 

 

We decorated our bird feeder with sticks from the yard, but you can certainly get creative and mix things up a bit. Your kids can paint the tin can, wrap string around the can, or glue buttons on it…anything you all are inspired to do to make it unique!

Sensory Bags

Porter Leave a comment

These bags are great for babies to play with and are a nice calming activity for bigger kids…heck, I even have a hard time walking by one without squishing it! They always feel so cool to the touch! We made ours pretty simple, but you can always embellish yours a bit by throwing some glitter in or some flat foam shapes.

Sensory gel bags - 1

 

 

Materials needed:

  • Ziplock quart-size bags
  • alcohol wipe
  • hair gel
  • food coloring
  • clear packaging tape

 

First, use the alcohol wipe to easily remove the Ziplock logo from the bag.

 

Next, squirt about a cup of hair gel into the bag.

Then add a few drops of food coloring. If you’re using glitter, throw that in too.

Seal the bag shut, making sure you leave little to no air in the bag. Squish the gel and food coloring together, adding more food coloring if you’d like a deeper color.

Reinforce all the edges of the bag with the packaging tape, especially the top, ensuring that the bag won’t split at its seams letting the gel-food coloring mixture out. All done!

WB likes to squish the bags on the kitchen floor, while L likes me to tape hers to the window, letting the sun shine through. As with most toys, you should never leave your baby alone with the sensory bags…you can never be too safe! Enjoy!