I Spy Bottle and Games

How many of you grew up loving the “Where’s Waldo?” books by Martin Handford or the “I Spy” books by Jean Marzollo and Walter Wick? My brothers, sisters and I adored them and now, L enjoys reading them too! The I SPY BOTTLE is very similar in principal and so much fun! It’s a fully contained game…no pieces to lose or to pick up! We take our bottle with us to restaurants on occasion and always on long car trips. The I SPY BOTTLE would be great fun in a classroom too! Be sure to scroll down, after the “how to” I’ve shared a few ideas of games to play.

Materials needed:

  • clear bottle with a wide mouth
  • rice
  • electrical tape
  • lots of small objects

First, remove the label from your bottle and clean and dry it completely. Goo Gone always works great for removing any stickiness and label residue! Fill the bottle a little over halfway with white rice.

Next, drop your objects in. We used beads, a bouncy ball, a plastic ring, spoon, animal figures, a marble, dice, a stamp, buttons, a clothespin, a rubber band, a paperclip, a toy car, keys, a wine cork, and although pictured is a crayon, I switched it out with a paintbrush. I was afraid the crayon would melt if left in the car!

 

Once the rice and objects are inside the bottle, use electrical tape to seal the lid closed. You could always use super glue, but I was afraid a time would come that we’d want one of the objects locked inside!

Now, time to shake your bottle up and play!!!

 

 

 

Different ways to play:

  • Call out the color of an object…”I spy something green!”…and have the other person find it.
  • Call out the function of an object…”I spy something that makes art!”…”A paintbrush!”
  • Things that rhyme. “I spy something that rhymes with ‘moon.'”…”Spoon!”
  • If your children can read, you could make little cards that go along with the I SPY BOTTLE too. How perfect would that be for a long car ride? Easy entertainment! Enjoy!!!

 

 

DIY Toy Vacuum (that Really Cleans!!!)

I love showing my kids that with a little creativity and a basketful of recycling materials you can make just about anything! One morning L woke up asking me to make her a vacuum…strange request, but I accepted the challenge. My thoughts immediately went to that toy vacuum from yesteryear with the popping balls inside. Kids love those things because of the noise they make, so I knew ours had to be similar. The only thing to improve upon that vacuum would be to make one that cleans as well! So here you have it — a toy vacuum that essentially costs you nothing (assuming you have all the materials) and it actually cleans the floors while your kid plays!

Materials needeed:

  • Swiffer sweeper w/ dry swiffer pad
  • empty milk carton
  • plastic container (like one berries come in)
  • plastic beads
  • duct tape
  • paper towel tube (optional)
  • hot glue gun
  • scissors

First, using scissors or a knife, cut a little window on the front of the milk carton. Cut a piece of clear plastic off of the plastic container to cover the window.

Using a hot glue gun, carefully glue the clear plastic in place over the “window.”

Cover the entire milk carton in duct tape. Make sure you cover up the glued edges of the plastic window as well…this should eliminate any sharp or pointy edges.

Next, have your little one help you drop beads into the carton. A few handfuls will do. Screw the lid back on the carton.

If your Swiffer sweeper’s handle has removable links (which I think they all do), remove the two middle ones to make it a more suitable height for your child.

Now the next step you can do in two ways: you can tape the milk carton directly onto the Swiffer sweeper…it may be more secure, but it may also leave some duct tape residue on the Swiffer. (That would be the more permanent option.) Or, you can glue and tape a paper towel tube onto the back of the milk carton and slide it onto the Swiffer’s handle. We went with the later…I thought it may jiggle more and make a louder, bead-popping sound too!

Now to clean floors…just replace the Swiffer pad as you would normally do and let your child go to work! (I mean play!) I really thought ours would last a couple weeks, but we’re going on 4 months now and every week L asks if she can help “vacuum” the floors. Enjoy!!!

 

Sensory Bottles, Sparkle Bottles, Glow-in-the-Dark Bottles, and an Ocean in a Bottle

We love SENSORY BOTTLES at Our Beautifully Messy House and have been experimenting with them for years! There are so many things to do with sensory bottles and sparkle bottles…some people use them as “time-out bottles” to help calm down their toddlers when they’re having a meltdown. We like to play with our SPARKLE BOTTLES outside in the summertime, pulling them around in wagons, burying them in dirt…and inside in the play areas of our house. (Okay, I admit…that’s every room of our house!) We take SENSORY BOTTLES with us on long car rides for simple, quiet entertainment. The kids love to bounce them around in the bathtub as well! The GLOW IN THE DARK BOTTLE is great for helping kids wind down at night and drift off to sleep. So much fun and so many possibilities!!!

 IMG_9308

 

 

I find the best, smoothest and cheapest bottles to use (esp. if you don’t drink soda regularly and have a collection already) are the soda water bottles. Just look in the water or beverage aisle of your grocery store, seeking out the cheapest option…usually only $2-$3 for a pack of 6. Instead of dumping the soda water down the drain, entertain your kids with the fun “Raisins + Soda Water Experiment” while you’re mixing up the SENSORY BOTTLES.

IMG_9316

SPARKLE BOTTLES

Materials needed:

  • empty plastic bottle
  • Elmer’s glitter glue
  • glitter, sequins, and/or beads
  • water
  • superglue

 

IMG_9267

First, put a small pot of water on to boil. When you add the water to the bottle you will want it to be hot, but not boiling. I like to bring the water to a boil, remove from heat and set aside for a few minutes to cool.

Meanwhile, add the Elmer’s glitter glue to the empty bottle…enough to fill the bottom inch or so of the bottle. Next, add some glitter, sequins and/or beads.

IMG_9268

IMG_9264

 

When the water is ready, carefully pour it into the bottle as well. I like to use a measuring cup or a funnel to make this step easier. Once the bottle is filled, use superglue to secure the lid. Now it’s time to shake, shake, shake!!! Shake the bottle for a few minutes, until all the glue melts into the hot water. You shouldn’t see any globs or streaks of glue once the bottle is complete. While the bottle is warm, the glitter and sequins will fall very quickly to the bottom. Once it cools down completely over the next hour or two, the glitter will fall much slower. So relaxing… I’d like to put myself in “time-out” with one of these bottles, wouldn’t you?

 

 

IMG_9321

IMG_9325

GLOW-IN-THE-DARK BOTTLES

Materials needed:

  • empty plastic bottle
  • Elmer’s glitter glue
  • glitter paint
  • glow-in-the-dark paint
  • glitter, sequins, and/or beads
  • glow-in-the-dark stars
  • water
  • superglue

 

IMG_9272

First, put a small pot of water on to boil. When you add the water to the bottle you will want it to be hot, but not boiling. I like to bring the water to a boil, remove from heat and set aside for a few minutes to cool.

Meanwhile, add the Elmer’s glitter glue to the empty bottle…enough to fill the bottom inch or so of the bottle. Next, add a squirt of glitter paint and a squirt of glow-in-the-dark paint. Add some glitter, sequins and/or beads.

 

IMG_9273

When the water is ready, carefully pour it into the bottle as well. I like to use a measuring cup or a funnel to make this step easier. Once the bottle is filled, screw the lid on tightly, but don’t superglue it yet. Now it’s time to shake, shake, shake!!! Shake the bottle for a few minutes, until all the glue melts into the hot water. You shouldn’t see any globs or streaks of glue once the bottle is complete. The bottle will be a milky color compared to the SPARKLE BOTTLES because of the glow-in-the-dark paints. Once the bottle is shaken and cooled a bit, add the glow-in-the-dark stars and superglue the lid in place. I guarantee your little one will be excited to go to bed tonight with a GLOW-IN-THE-DARK BOTTLE in hand!!!

 

 

IMG_9310

IMG_9296

 

 

OCEAN IN A BOTTLE

Materials needed:

  • empty plastic bottle
  • oil (vegetable oil or baby oil)
  • water
  • food coloring
  • superglue

 

 

IMG_9269

First, fill the bottle about 1/3 of the way full with water. Add a few drops of food coloring and screw the lid on tight. Shake the bottle a bit until the food coloring is evenly dispersed throughout the water. Next, fill the bottle the rest of the way with oil…using a funnel is best. Superglue the lid onto the bottle. Complete!

 

IMG_9329

 

Have fun swishing the bottle from side to side or shaking it all up, just to watch the bubbles of oil pop while the water settles at the bottom and the oil at the top. This is a great time to talk to your kids about the density of liquids as well! It may be a bit over their heads if they’re really young, but you’ll be surprised at what they will comprehend and remember! Basically, the water weighs more (has a higher density) thank the oil and will sink below it in the bottle, no matter how much you shake your OCEAN IN A BOTTLE and attempt to mix the two together. So cool!!!

 

Sensory Bottles for Baby

I’ve made sensory bottles for L before, filled with colored water, glue and glitter or colored water and oil, but I don’t know why we never made SENSORY BOTTLES FOR BABIES until now. Babies and toddlers both love them!

 

The water-filled bottles are fun to look at, but too heavy for WB to really handle safely. Making these SENSORY BOTTLES FOR BABIES was a terrific tactile activity for L, and WB seems to love shaking and playing with the bottles. Not only are they fun to play with around the house and in the car, but sensory bottles make great bath toys too!

 

 

Materials needed:

  • small, plastic bottles with lids
  • any of the following: pom-poms, feathers, sequins, straws, ribbon, cereal, dyed rice, etc.
  • glue

Making the bottles is pretty self-explanatory… Remove the label from the bottle. Fill with small, colorful items. Glue the lid shut.

As always, never leave infants unattended with toys, especially if it includes small items. You can never be too safe! Enjoy!!!

 

 

Have you seen our DIY Baby Play Area yet??? These bottles would be a great addition!

Play Dough Funny Faces w/ DIY Outlet Covers

When I saw a variation of this craft years ago, I stored it away in the back of my mind, just waiting for L to be old enough to make and play with these! The outlet covers I saw were made using Sharpie Markers, but I love the color we brought to ours with paint! The outlet-cover funny faces are as much fun to make as they are to play with! L and I spent one day painting the outlet covers, let them dry overnight, then the next day, we were able to glue on the googlie eyes and stick them in our play dough! So silly and so much fun!

 

Materials Needed:

  • outlet covers
  • paint (acrylic and/or puffy paint)
  • googlie eyes
  • jewels (optional)
  • hot glue gun and glue
  • your favorite play dough
  • egg cartons (optional)

 

The first thing I did, preparing our work station, was to cut off the center tips of an egg carton. I then put an outlet cover in each opening so L could paint them with ease.

 

Then, paint away! I tried to paint mouths and noses on the outlet covers, while I let L paint hers however she pleased. I figured the ones she painted could be used to glue on the eyes and jewels later on.

 

 

After the glue dries, you can go over some with puffy paint too! I thought it was a fun effect for big, puffy lips!

Using a hot glue gun, attach some googlie eyes and jewels to a few of the other outlet covers.

 

Now it’s time to play! Just push the outlet covers into your favorite play dough…the funny face possibilities are endless!

 

 

 

 

 

I love how the play dough doesn’t stick to the outlet covers, rather it just falls off, making clean-up a breeze! Please share pictures of your funny faces…we’d love to see them! Enjoy!

Daniel Tiger’s Neighborhood (aka Mr. Roger’s Neighborhood)

Our crafts come from many different directions, with many different goals in mind…the day we made Daniel Tiger’s Neighborhood my goal was to turn the T.V. off and keep it off for as long as possible! So I decided to bring L’s favorite T.V. show neighborhood to life! You really could do this with any neighborhood, real or make-believe.

Daniel Tigers Neighborhood-2

 

Daniel Tigers Neighborhood-13

 Using items found in our recycling basket, kitchen cabinets, and craft closet we pieced together the houses, castle, clock factory, etc. After all the buildings were up, I used painter’s tape to make a road for “trolley” to drive around on. Painter’s tape should be in everyone’s craft pile…it sticks when you need it to, but comes right-up no problem once you’re done playing. We use it allll the time!

 

Daniel Tigers Neighborhood-6

Daniel Tiger’s house: old cookie dough container and construction paper

Daniel Tigers Neighborhood-10-EFFECTS

O the Owl’s House: toilet paper roll, tissue paper, construction paper

 

Daniel Tigers Neighborhood-8Daniel Tigers Neighborhood-5

 

 Jungle Beach: cookie tin lid, beans, construction paper

Daniel Tigers Neighborhood-7

Prince Wednesday’s Castle: shoebox, random round packaging from recycling basket, construction paper

 

Daniel Tigers Neighborhood-9

 

Museum-Go-Round: round hat box, cookie dough container, construction paper

Daniel Tigers Neighborhood-12

Trolley: vintage Little People bus, construction paper….Ding! Ding!

And there you have it. Random stuff pieced together in the form of a neighborhood. Whose neighborhood will you make today?